Manual trans conversion
Joined: Apr 2010
Posts: 12,601
From: Mentor, Ohio
I wish I had input, but that's a project out of my league at this time.
I hope someone can assist you with some information.
As you roll forward, feel free to share some pics and updates!! Sounds like a nice setup!!
I hope someone can assist you with some information.
As you roll forward, feel free to share some pics and updates!! Sounds like a nice setup!!
You just need a custom drive shaft and new mounts for your crossmember. Get a pedal assembly from a chevelle and convert it to hydrolic. That should get ya started. Oh yeah, depending on the t5 you may need a speedo adapter(some have vss)
It already has the pedals from a chevelle installed. I didn't even think about the speedo part. Guess Ill cross that bridge when I get there. I have a 340 hp 355 out of my stock car that Im going to freshen up for it with 3" exhaust with flowmasters. Plan is to get all the mechanicals done and running like a champ then the cosmetics begin. Its a good solid car with a factory tach and gauge dash. Its factory dark silver with black interior and top.
Thread
Thread Starter
Forum
Replies
Last Post
lynchs
Monte Carlo Repair Help
12
Feb 10, 2016 12:18 AM
Dude13450
Monte Carlo Repair Help
0
May 21, 2013 12:17 AM











