I am looking for either a diagram or a picture of the front upper control arm and ball joint on either the driver or passenger side of a 1978-1988 G body car. Would be great if someone could pull off a tire and take me a picture. I put lowering springs in mine and the steering geometry is way off when wheels are turned. I'm wondering weather I have the arms on the correct side even though I marked them before painting and rebuilding. which is possible or do I need to get an adjustable upper arm. Hoping someone can help, if it matters they are Eibach spring which should lower it about 1 1/2 inches Thanks in advance.

 

try this link on google and see if it helps you out?
these are only the images if you need tech then select the tab that says all.


https://www.google.com/search?q=1978...=1530489022829

 

Thanks Dean, but most of them pictures show aftermarket control arms and I'm running factory at the moment .They have a distinctive shape and I'm questioning myself.

 

I found a picture on the Car ID site by looking up a replacement control arm .