2K Monte stalls when put in gear
#11
Problem seems to be returning..... Stalls or near stalls at idle,,,,, error code on two testers says cam sensor,,, but I put a new cam sensor on it when I did head gasket job,,,, anything can happen, new parts 'can' fail,, but what other demons can be going on, to fool the computer,,, that it thinks it is the cam sensor ,,,,,
#12
Problem seems to be returning..... Stalls or near stalls at idle,,,,, error code on two testers says cam sensor,,, but I put a new cam sensor on it when I did head gasket job,,,, anything can happen, new parts 'can' fail,, but what other demons can be going on, to fool the computer,,, that it thinks it is the cam sensor ,,,,,
If it's missing, and down on power, (due to age) it will definitely die when put in gear. One of the oboe tests should point you in the right direction. Could even be the wrong head gasket. h
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): gear set, 4th gear hub, channel plate gouged! help!
turbo monte
Engine/Transmission/Performance Adders
2
04-04-2013 10:01 AM
Beladona_13
Engine/Transmission/Performance Adders
2
10-07-2012 03:37 PM
Boomer
Engine/Transmission/Performance Adders
2
05-22-2011 08:26 PM
blownincome
Engine/Transmission/Performance Adders
5
03-15-2010 10:43 PM