Air intake?
#21
Just to make some power i think i'll add JMB fenderwell intake, 3.6 pulley, ZZP 2.5 downpipe, PLOG, and ZZP 180 thermastat, 104 plugs, canned tune. can i run a 3 inch download with 2.5 outlet..
Last edited by 2004DaleJr.SS; 07-26-2020 at 04:26 PM.
#22
I bought a K&N intake and modified the box a lot. Sealed all the edges and gaps, insulated the sides/top/bottom and relocated the IAT sensor. Using a scanner before and after it would gain approximately 15*C (yup I’m canadian) cruising at low speeds 35*C at a stop and dropped to ambient on the highway. Still much better than the stick box. After the mods I made to it, and prior to IAT relocation those temps all remained within 2-3* of ambient. That’s when I moved the IAT.
My next step is taking an old headlamp housing and using fibreglass to create a funnel and fender block off for track days. It’ll work like a ram air to feed the air box. And looks way less ghetto than just taking out the headlight 😉👍
My next step is taking an old headlamp housing and using fibreglass to create a funnel and fender block off for track days. It’ll work like a ram air to feed the air box. And looks way less ghetto than just taking out the headlight 😉👍
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): K&N air filter and new air intake question??
HIxArsenaL
Headers/Intake/Exhaust
3
07-25-2013 09:12 PM