7th Gen ('06-'07): 2006 monte carlo flasher location
Thread Starter
|
Joined: Sep 2018
Posts: 1
2006 monte carlo flasher location
I have a 2006 monte carlo 2dr 6cyl. Passenger side front turn signal does not work, bulb lights up but does not flash, new bulbs do not flash. Put a new turn signal switch in but no difference. I can not find anywhere online that will show me where the flasher relay is. The fuses for the turn signals are both good aswell
Joined: Jul 2020
Posts: 41
From: Las Vegas
I'll bump this thread because I have the same question. I'm dealing with hyperflash and I want to know if I can find a replacement relay that compensates for LED's.
I realized while trying to find the relay that the clicking I was looking for was actually coming through the stereo like a simulated relay sound! Is there a relay at all in these later Monte's?
I realized while trying to find the relay that the clicking I was looking for was actually coming through the stereo like a simulated relay sound! Is there a relay at all in these later Monte's?
Joined: Oct 2009
Posts: 4,159
From: Coal City,Il
Monte Of The Month -- May 2012
Monte Of The Year 2012
Monte Of The Month -- February 2017
Monte Of The Year 2012
Monte Of The Month -- February 2017
Joined: Jan 2008
Posts: 4,944
From: Mountains of Utah
Isnt it built into the hazzard switch? I believe @The_Maniac has solutions for this...
Joined: Apr 2010
Posts: 12,606
From: Mentor, Ohio
I have a 2006 monte carlo 2dr 6cyl. Passenger side front turn signal does not work, bulb lights up but does not flash, new bulbs do not flash. Put a new turn signal switch in but no difference. I can not find anywhere online that will show me where the flasher relay is. The fuses for the turn signals are both good aswell
The BCM controls the vehicle turn signals based on inputs from the turn signal/multifunction switch. With the turn signal/multifunction switch in the left turn position, a ground path is provided on the left turn signal switch signal circuit, indicating a left turn signal request. With the turn signal/multifunction switch in the right turn position, a ground path is provided on the right turn signal switch signal circuit, indicating a right turn signal request. When the specific request is seen, the BCM will pulse the respective turn signal lamp supply voltage circuits, illuminating the turn signal lamps.When a turn signal request is seen by the BCM, a serial data message is sent to the instrument panel cluster (IPC) requesting the respective turn signal indicator be pulsed.
Joined: Apr 2010
Posts: 12,606
From: Mentor, Ohio
I'll bump this thread because I have the same question. I'm dealing with hyperflash and I want to know if I can find a replacement relay that compensates for LED's.
I realized while trying to find the relay that the clicking I was looking for was actually coming through the stereo like a simulated relay sound! Is there a relay at all in these later Monte's?
I realized while trying to find the relay that the clicking I was looking for was actually coming through the stereo like a simulated relay sound! Is there a relay at all in these later Monte's?
If you are dealing with a 00-05 monte (and based on your profile pic, looks like you are), the clicking you hear is not simulated, it is not coming from the radio. I can guarantee, the sound you are hearing is the relay in the flasher module.
Here is the thread to my modded flashers I sell. I have some now all set and ready to ship. $40 via paypal and I will have them with USPS ASAP.
https://montecarloforum.com/forum/pr...signals-62250/
if you want to do the mod yourself, here is the info (my original "test bed" was my Grand Am, same flasher module):
https://montecarloforum.com/forum/fw...signals-61550/
And here is when I finally did everything with my Monte:
https://montecarloforum.com/forum/pa...r-flash-62573/
Last edited by The_Maniac; Oct 25, 2021 at 10:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
