5th Gen ('95-'99): Need info on setups
#11
already did all i got is that it need a cat, res, and muffler..... i am starting to think i will be better off just having the shop do a full exhaust with magnaflows considering that what my friends car has and he has not been pulled over ever for noise
#12
if its a 1997 no need to pass tailpipe emmisions so do dual straight pipes thats the best nascar like look for the sides a muffler on the sides looks dumb because with 5th gens your gonna see the whole muffler theres no way to hide it on the side unless you have a custom skirt
Northstar Swapped Monte - Car Videos on StreetFire
I think you should do magnaflow.
#14
well this was unfortunate. The guy at the muffler shop told me he couldnt do it and still have it where its legal. So I have no choice to follow pheonix design I got a nice magnaflow muffler thats about 18 inches long with an oval case and going to have it built in off the cat to the resonator then the muffler pipped off with a y bend and 2.5 inch piping coming out the back for the straight piped look. ill post a vid when i get my car back.
#16
It wasnt the muffler it was fitting a cat resonator and muffler that couldnt be fit in there. I would of needed the resonator to be taken out.....and for me that wasnt going to happen. When my old exhaust fell appart it broke just before the resonator and that was so crazy loud in the cabin. and drone at highway speeds was deffening. but anyways, sure we could of made it fit with some 180 and 90 degree bends but that would of cost way too much. This shop is also the best around where i live its 5 minute walk from my house, and they are cheap. To do thi full exhaust with me just having to buy the muffler, they are charging 200-250 for piping welding, hanging, buying a new resonator with a 2.5 in/out, and tucking the exhaust sytem in. add that with the price of the magnaflow oval shell muffler i got a steal on that comes to a total of 250-300 dollars.
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): Need bumper cover info and lower body kit info - restoration
davidk67
Paint/Body Work/Exterior
1
05-10-2012 09:21 AM