General Monte Carlo Talk Talk about the Monte Carlo. Does not have to be your Monte. Can include pics and games.

air in cooling system

Old May 5, 2012 | 06:53 PM
  #1  
stged455's Avatar
Thread Starter
|
Joined: May 2012
Posts: 5
Default air in cooling system

cant get air out tryed squeezing hoses.start car while cool with heater on dont get nothing but steam. gets hot instantly if try drive. HELP!
 
Old May 5, 2012 | 07:38 PM
  #2  
lougreen03's Avatar

Monte Of The Month -- March 2013
5 Year Member3 Year Member1 Year Member
Joined: Jun 2010
Posts: 8,442
From: michigan
Default

Maybe you have a lower intake manifold leak letting more air into the system.
 
Old May 5, 2012 | 07:40 PM
  #3  
DRuben's Avatar
Joined: Dec 2010
Posts: 677
From: Baton Rouge, Louisiana
10 Year Member
Default

Originally Posted by stged455
cant get air out tryed squeezing hoses.start car while cool with heater on dont get nothing but steam. gets hot instantly if try drive. HELP!
What year Monte? I know on the 6th gen there should be a plug thing at the top of the thermostat housing that you can loosen with a socket to get the air out... I know this is a crazy question but have you checked your coolant level? Another troubleshooting step is to take out your thermostat and put it in some boiling water for a few minutes, take it out and see if it closes up to check to see if its working properly.
 
Old May 5, 2012 | 07:46 PM
  #4  
DRuben's Avatar
Joined: Dec 2010
Posts: 677
From: Baton Rouge, Louisiana
10 Year Member
Default

Originally Posted by lougreen03
Maybe you have a lower intake manifold leak letting more air into the system.
I forgot to mention this , sometimes you can take your oil cap off and look for yellowish stuff in it.
 
Old May 6, 2012 | 12:35 AM
  #5  
The_Maniac's Avatar

Monte Of The Month -- December 2011
Monte Of The Month -- September 2014
10 Year Member5 Year Member3 Year Member1 Year Member
iTrader: (2)
Joined: Apr 2010
Posts: 12,601
From: Mentor, Ohio
15 Year Member
Default

- Have you ensured you have proper amount of coolant?
- Do you get any large white clouds out the exhaust?
- Have you checked for leaks?
- This sounds nuts, but I've done this once, take it for a drive, when it's past the threshold for when T-Stat opens and fans kick and it's still climbing (but not in the red), pull over, leave the car idling, open the bleeder for a second (air should shoot out).

BTW - In my experience, failed LIM gaskets cause coolant leaks (so you'll be running low on coolant often) and unless you are low on coolant, the gauge should not read hot.
 
Old May 6, 2012 | 08:58 AM
  #6  
stged455's Avatar
Thread Starter
|
Joined: May 2012
Posts: 5
Default

raised front of car took bleeder out filled with coolant until ran out of bleeder. tightened bleed. then took top rad hose off to be certain is full of coolant. poured coolant in hose and replaced. started engine brought up to temp topping off coolant as it burped. oh yeah had the heater on and fan turned off. still gets hot. cracked bleeder and all get is dteam. never had this much trouble. but dont deal with new chebbys. just dont understand.
 
Old May 6, 2012 | 08:59 AM
  #7  
stged455's Avatar
Thread Starter
|
Joined: May 2012
Posts: 5
Default

all i did was flush system to get crappy dex cool out. now this mess
 
Old May 6, 2012 | 09:00 AM
  #8  
stged455's Avatar
Thread Starter
|
Joined: May 2012
Posts: 5
Default

no leaks no signs of head gasket failure or intake fail.
 
Old May 6, 2012 | 09:28 AM
  #9  
STUMPMI's Avatar

Monte Of The Month -- February 2013
3 Year Member1 Year Member
iTrader: (1)
Joined: Dec 2011
Posts: 9,944
From: Taylor Michigan
5 Year Member
Default

Theres obviously something else going on here.....

If all you did was a fluid flush.....Maybe in the process something plugged up? Only have 2 other suggestions....Try re flushing the system...and boiling the thermostat to see that it operates properly..

2nd) I would pressureize the system and check to see if it leaks down....
to eliminate any leaks from upper or lower intakes....
How about leaveing the radiator cap off..while its running and see if you have any flow?
As the thermostat opens and closes....



Did you maybe try throwing it over your shoulder and lightly tapping it on the back? Just kidding!
 

Last edited by STUMPMI; May 6, 2012 at 09:31 AM.
Old May 6, 2012 | 09:38 AM
  #10  
stged455's Avatar
Thread Starter
|
Joined: May 2012
Posts: 5
Default

fixed got air out old fashioned way. filled coolant run till hot let cool add coolant. donre this 2 times now good shape thanks .
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kmnwa
Monte Carlo Repair Help
6
Oct 28, 2015 02:41 PM
RickCoMatic
General Monte Carlo Talk
6
Mar 4, 2009 08:59 PM
jessymo
Monte Carlo Repair Help
3
Jan 31, 2009 12:52 PM
RickCoMatic
General Monte Carlo Talk
3
Dec 23, 2007 07:29 PM
desighitter
Monte Carlo Repair Help
1
Mar 12, 2006 08:42 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:53 AM.