Strange clunking noise when turning
seems difficult
i'd be better to just replace it with a fresh new one :pbut that definitely has to be where the clunking is coming from, thanks for the link man
Frank, the process in that link DOES seem a bit difficult.
But Mike has a link to how he lubes his ISS, it was much easier and It had pictures I believe.
Maybe he'll come in here and post as I don't have the link.
*edit*
did some research and found the following. It's also very in depth but the first two steps are probably what I would try first.
http://www.colinkraft.com/shaft.php

Shoot down some lube in there. I believe this is what Chibi does every spring on his Monte.
But Mike has a link to how he lubes his ISS, it was much easier and It had pictures I believe.
Maybe he'll come in here and post as I don't have the link.

*edit*
did some research and found the following. It's also very in depth but the first two steps are probably what I would try first.
http://www.colinkraft.com/shaft.php

Shoot down some lube in there. I believe this is what Chibi does every spring on his Monte.
Last edited by Jomao_o; Dec 30, 2011 at 01:40 PM.
Frank, the process in that link DOES seem a bit difficult.
But Mike has a link to how he lubes his ISS, it was much easier and It had pictures I believe.
Maybe he'll come in here and post as I don't have the link.
*edit*
did some research and found the following. It's also very in depth but the first two steps are probably what I would try first.
http://www.colinkraft.com/shaft.php
Shoot down some lube in there. I believe this is what Chibi does every spring on his Monte.
But Mike has a link to how he lubes his ISS, it was much easier and It had pictures I believe.
Maybe he'll come in here and post as I don't have the link.

*edit*
did some research and found the following. It's also very in depth but the first two steps are probably what I would try first.
http://www.colinkraft.com/shaft.php
Shoot down some lube in there. I believe this is what Chibi does every spring on his Monte.
Thanks Bro!
Hope that solves the problem. Thread
Thread Starter
Forum
Replies
Last Post

















