LED License Plate Bulb White 194
#24
I bought mine online at superbrightleds 194 LED Bulb - 5 SMD LED Wide Angle Wedge Base | Miniature Wedge Base LEDs | LED Car Bulbs | Super Bright LEDs It was about a millimeter or so too long but after I wiggled it around a bit it worked and it's really bright too
194 LED Bulb - 15 SMD LED Wedge Base Tower | LED Landscape Lighting | Super Bright LEDs
#25
#26
I had the day off again today so I wanted to get this done while I had the time and while there is still no snow on the ground.
I cut out the bumper on either side of the existing bulb opening to clear the housing in their new positions. I traced the existing opening, made a template and traced that onto either side using the existing screw holes as reference points. Then just drilled a hole for the outer screws
Then I wired the 2nd bulb to the existing. Don't worry I used heat shrink connectors to splice connection and a heat shrinking tubing to seal it up. Electrical tape covers all that. You can see the original bulb assembly is on the left and the cavalier one is on the right
Nothing left to do but put it all back together. The idea was to make it look like it could be stock. I'll put up some nite pictures later
#27
I checked today and I did buy the 15 led bulb instead of the 5 led one. It is a really tight fit and you kind of have to wiggle it around and position it just right inside the housing for it to work but it is bright
Thread
Thread Starter
Forum
Replies
Last Post
KingOf206
Interior/Audio/Visual Electronics
12
12-25-2013 07:12 AM
Bruce All-Monte
Tires/Rims/Suspension
11
01-05-2011 09:07 PM