rubbing noise help!!!!!!!!!!!!!!!!!!!!!!!
#11
RE: rubbing noise help!!!!!!!!!!!!!!!!!!!!!!!
Shop around, $520 is way too much to replace one wheel bearing assy. I recently replaced one on my car and it cost me $250.
The part is only $100 and I will more than likely do it myself next time.
The part is only $100 and I will more than likely do it myself next time.
#13
RE: rubbing noise help!!!!!!!!!!!!!!!!!!!!!!!
thank god i guess i will make a trip up to the dealer mon to get a good price does anyone know step by step how to do it and the tools needed i think i should be able to do it at the hobby shop on base where i did my u-bend and res delete friday only $2 per hour
#16
RE: rubbing noise help!!!!!!!!!!!!!!!!!!!!!!!
I would go buy a haynes manual for your car. The manual for my '99 is very detailed although I've heard that some say to take your axle to a dealer to have them install the wheelbearing and that isn't needed.
#17
RE: rubbing noise help!!!!!!!!!!!!!!!!!!!!!!!
ORIGINAL: IAHKAT
Shop around, $520 is way too much to replace one wheel bearing assy. I recently replaced one on my car and it cost me $250.
The part is only $100 and I will more than likely do it myself next time.
Shop around, $520 is way too much to replace one wheel bearing assy. I recently replaced one on my car and it cost me $250.
The part is only $100 and I will more than likely do it myself next time.
#19
RE: rubbing noise help!!!!!!!!!!!!!!!!!!!!!!!
ORIGINAL: v8_Killa
was your car doing the same thing?
was your car doing the same thing?
Thread
Thread Starter
Forum
Replies
Last Post
Jdevon708
Engine/Transmission/Performance Adders
1
07-03-2008 07:49 PM