drl310P.jpg

I replaced the upper intake manifold gasket on my '01 SS today, and I'm concerned that my fuel rail/injectors aren't seated in far enough after putting the fuel rail back in. I also replaced the injector O-rings, and the four bolts holding the fuel rail are torqued down, but they still look to be too high. Of course I didn't take any 'before' pictures, and I can't remember exactly what they looked like before (and were covered in coolant).

Anybody have any opinions/help for me here?

Much thanks!
Dave

 

They seem to be fine but one way to find out is 5th fire it up and test drive it

 

That's the plan tomorrow morning, just thought I'd check with this crew as this is my first time really dealing with fuel injectors.

Thanks for your input!