Monte Carlo Repair Help Have a Monte problem and need help? Good at troubleshooting? Discuss it here!

98 Z34 running problem

Old Nov 20, 2011 | 11:30 PM
  #1  
puffins629's Avatar
Thread Starter
|
Joined: Apr 2010
Posts: 33
Default 98 Z34 running problem

My car starts for about 2 sec and the it just dies no matter what I do. I just changed the computer on it about 3 months ago and had the same problem. The battery died and i needed to jump it then it ran fine. I disconnected the battery to try and reset everything and it didn't help. So now the car is sitting at my work with the battery disconected hoping it will help when I go back in tomorrow. I am just wondering if there are any other suggestions that can help me if this doesn't work tomorrow. PLEASE HELP!!!!!!!
 
Old Nov 21, 2011 | 01:00 AM
  #2  
nitehawkjcb's Avatar
Monte Of The Month -- April 2012
Monte Of The Month -- December 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 3,211
15 Year Member
Default

Unplug the MAF sensor, see what happens

Also check your fuel pressure
 
Old Nov 21, 2011 | 06:00 PM
  #3  
puffins629's Avatar
Thread Starter
|
Joined: Apr 2010
Posts: 33
Default

I got fuel pressure and disconnected the maf sensor and nothing changed Idk what else to do.
 
Old Nov 21, 2011 | 07:56 PM
  #4  
puffins629's Avatar
Thread Starter
|
Joined: Apr 2010
Posts: 33
Default

I have noticed since I have been trying this for a while I here 2 clicks right before it shuts down but I can't tell where it is coming from
 
Old Nov 21, 2011 | 07:57 PM
  #5  
zipper's Avatar
Monte Of The Month -- March 2011
3 Year Member1 Year Member
Joined: Sep 2009
Posts: 1,835
From: Shelby, MI
5 Year Member
Default

If you unplugged the MAF and nothing changed, then that's your problem. You need to replace the MAF. When you typically unplug the MAF, your car will run like crap.
 
Old Nov 21, 2011 | 10:17 PM
  #6  
puffins629's Avatar
Thread Starter
|
Joined: Apr 2010
Posts: 33
Default

It can't run long enough for me to tell like I said it only runs for maybe 2 sec
 
Old Nov 21, 2011 | 10:27 PM
  #7  
mrl390's Avatar

Monte Of The Month -- December 2009
5 Year Member
Joined: Oct 2007
Posts: 3,604
From: Canonsburg, PA
Default

Does it fire right up and then die or take some coaxing to get started? When did you check the fuel pressure? With key on engine off or while cranking?
 
Old Nov 22, 2011 | 07:27 AM
  #8  
puffins629's Avatar
Thread Starter
|
Joined: Apr 2010
Posts: 33
Default

It starts right up and you can rev it then after 2 sec it dies every time and we checked fuel pressure while cranking/ starting. I did try reseting the security system but that didn't work and I don't have a security light on or any codes.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SouthCarolinaSS
Monte Carlo Repair Help
1
Jan 12, 2014 03:26 PM
RickyakaPedro Keller
Engine/Transmission/Performance Adders
5
Sep 4, 2012 10:08 PM
97MONTEZ34
Monte Carlo Repair Help
8
Apr 23, 2012 12:28 PM
Cheeko
Monte Carlo Repair Help
25
May 24, 2011 01:08 PM
polososa
General Monte Carlo Talk
2
Mar 2, 2010 09:11 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:36 PM.