ok i got the axle problem fixed now when i take off the car feels like the breaks are pressed and when i do get the car moving the car goes from 1 st gear to 4 th gear

 

Has this transmission ever worked properly for you or has there been an issue since you installed it?

What ended up being the problem with the axles?

 

when I removed the axles I took them apart so I can insert into the other transmission so I didn’t lose the transmission fluid and make a mess and I stuck the transmission in I got the axle ends reversed and that what happened now that I put them in the right way they stayed in okay I still have the no start but the only way I can test the transmission is to just to jump the purple wire from the starter to the hot cable and it would start I would start to move it felt like the brakes were pressed and it would go from 1st to 4th gear and on the dash it would not mark what gear I was in so that is the problem now the car never moved cause I bought it with a bad transmission

 

To whtmonte's point, I'd be very suspect that this transmission is broken as well. If its never worked in your car and doesn't seem to be working right now, theres a chance it is broken.

I didn't totally catch all of the issues from the other thread (no start problem). IMO I'd focus on getting that fixed first. With all of the electronic controls, I'd be skeptical of saying good or bad with having to jump wires to make things work. It would be ideal to get it starting and running normally first before diving back into the transmission operation.