lower engine mount
#11
thank s for the info,i just order from speed daddy,but most of the headers for the supercharged are 1 3/4 of primary tube , i also have a cadillac sts 97 and it s good for the scrap i take off the throttle body to put on my monty do i have to swap the maf and tps ???
#12
thank s for the info,i just order from speed daddy,but most of the headers for the supercharged are 1 3/4 of primary tube , i also have a cadillac sts 97 and it s good for the scrap i take off the throttle body to put on my monty do i have to swap the maf and tps ???
you will need the throttle body, cable bracket, mass air flow meter, and tps connector harness. or buy one from zzp. https://www.zzperformance.com/grand_...=332&catid=108
you don't need the maf from the N* you swap the stock one from your monte to it. last but not least you will need the adaptor plate for the N*. as far as i know you will not find anyone making the 96-99 N* adaptor plate any more. if you seriously want to do this setup lmk cuz i might know someone still making or can make one for you. i'm running this old N* setup btw.
Last edited by nemesis; 06-28-2010 at 12:05 AM.
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): lower mount.
Dstevens
Engine/Transmission/Performance Adders
5
06-29-2013 11:29 AM
Mod Guide: ls4 engine mount, throttle body spacer.
inssanity21
FWD Tech Guides '95-'07
26
01-11-2012 06:03 PM
furcioelbraveado
Tires/Rims/Suspension
7
01-05-2010 08:59 PM
2003supersport
Engine/Transmission/Performance Adders
5
11-03-2008 01:07 AM