Help needed fellas.
#12
^^^^ This is another good idea to check. With removing and reinstalling the radio it could have put the car into a security lockdown. Wont let it start. Also, the shop should definately replaced the rotor from hitting and riding on the road surface. If not, request that they do it to be on the safe side. Also, make sure they checked the caliper piston, we had a car come into our shop at work with the same thing. The wheel came off on the interstate, we towed it in, the tech couldnt get the piston to press back into the housing. Measured the distance from the face of the piston to where it seats in the caliper and the piston was cocked in the housing and jammed. New caliper, pads, and rotor.
#14
^^^^ This is another good idea to check. With removing and reinstalling the radio it could have put the car into a security lockdown. Wont let it start. Also, the shop should definately replaced the rotor from hitting and riding on the road surface. If not, request that they do it to be on the safe side. Also, make sure they checked the caliper piston, we had a car come into our shop at work with the same thing. The wheel came off on the interstate, we towed it in, the tech couldnt get the piston to press back into the housing. Measured the distance from the face of the piston to where it seats in the caliper and the piston was cocked in the housing and jammed. New caliper, pads, and rotor.
Thread
Thread Starter
Forum
Replies
Last Post
7th Gen ('06-'07): Help fellas !
Hiroska
Engine/Transmission/Performance Adders
5
04-24-2014 10:55 AM
blackmonte781
General Monte Carlo Talk
7
06-03-2012 10:11 PM
Skeletal Crow
Paint/Body Work/Exterior
2
03-30-2011 10:04 AM