Wheel Spacers? Yes or No?
Thread Starter
|
Monte Of The Month -- February 2014
Joined: Oct 2010
Posts: 1,715
From: British Columbia, Canada
Have run aluminumn wheel spacers on mine as I put on wider tires on my factory rims giving me a more bulging sidewall and bigger foot print for additional traction and they are holding up just fine. And believe me I run the car pretty hard out on the track and autocross course's and all the wheels are still on the car.....
... Appreciate the advise, now my only concern is whether I go 5/16" or 7/16"
... Trial & error I suppose... Thanks again,
Thread Starter
|
Monte Of The Month -- February 2014
Joined: Oct 2010
Posts: 1,715
From: British Columbia, Canada
... Would stock 6th gen rims be the same specs (off-set), would I use the same stock studs?... Thanks,
Last edited by Crusader SS; Feb 5, 2011 at 09:06 PM.
Joined: Oct 2014
Posts: 59
From: kentucky
what you just said helps me a lot. im looking for a set of wheels that stick to the 40 mm offset up front running a 17 by 7 wheel and 225/50 zr 17 and a 20 mm or less offset in back and 235/55 zr 17 in back.
i just want to take a little rubber of the diameter going with 17 inch stuff and widen the rear track. i dont want to get near the fender lips or the struts and wheel tubs.
im curious what size tires you get away with because you're having the same kind of fun that puts a big grin on my face.
thanks
i just want to take a little rubber of the diameter going with 17 inch stuff and widen the rear track. i dont want to get near the fender lips or the struts and wheel tubs.
im curious what size tires you get away with because you're having the same kind of fun that puts a big grin on my face.
thanks
Thread
Thread Starter
Forum
Replies
Last Post
Submariner
Headers/Intake/Exhaust
2
Jul 3, 2008 01:10 PM
