Hey everyone, I've got a few things for sale.

First is a brand new ZZP Aluminum Transmission Pan. Here are the details on that from ZZP:

Fits GM cars and mini-vans with the 4T65E,/4T60E transmission.
Stock dimensions with half inch cooling fins.
Drain bolt (with threads the same as small block chevy, 1/2-20) allows fluid changes without the mess
Cooler transmission for longer lasting clutches.
No chance of leaking makes it much safer than a transmission cooler.
No added weight to the vehicle compared with a trans cooler which adds a few pounds.
No blocking of the radiator for cooling keeps the engine running cooler.
Intercooled cars work better without blockage to the front radiator.
Highly recommended for turbo cars and higher stall converter applications.
Designed, developed, tested and manufactured by ZZPerformance

Here are some pictures. Brand new, never used. SOLD (Priced at $209.99 + shipping from ZZP)



Next up, I have a set of rear STB mounting brackets made by Don Rome. They look to be in good condition. SOLD



And I also have a few couplers made by Spectre. I was going to use them for a custom intake but I decided to just drop a new filter into my stock air box and use that.

One is part number 9742 which is a 3.5" to 4" Coupler. I believe it should fit the TB so you could connect a 4" tube for a 4" intake setup.

The other is number 9772 which is 4" to 4", but it also has an adaptor that you can connect 3.75" to 4", this also could possibly fit to a TB, or connect two 4" pieces.

I'd like $15 for both.



All prices include shipping to anywhere in the Lower 48 States. Also open to offers and willing to combine some of these and offer a discount.

I also still have an Aeroforce and Three Gauge Pillar Pod for sale ---->https://montecarloforum.com/forum/pr...lar-pod-39970/

And an SSM90 Supercharger Kit, recently lowered the price a little ---->https://montecarloforum.com/forum/pr...-intake-39298/

Thanks for looking, feel free to make me an offer or contact me with any questions

 

Wish I had the funds to justify the trans pan (since I plan to pan drop and fluid change this spring). I saw a ZZP Black Friday deal on them and still, just could NOT pull that trigger (so this is like a second teasing). UGH!!

GLWS!

 

Thanks! I did a pan drop and fluid change right before I got this or else I would have put it on.. If I've still got it the next time I'm due I'll probably put it on.




I'm open to offers on all of the items I have for sale! No prices are firm, worst I could say is no

 

Price lowered on the Trans pan, $150 shipped anywhere in the US

 

BUMP for a good seller!

 

Thank you Mitch

 

Is $150 your lowest price on the pan? Thanks.

Wayne

 

$150 including shipping. It's $210 from ZZP + shipping so I'm pretty firm at that price for now. I'm always open to offers though

 

Does this pan use the stock bolts and factory reusable pan gasket? I know the bolt holes are recessed on the flange but the flange on that pan looks a lot thicker than the factory pan. Does this pan increase fluid capacity or is it the same as the factory pan? Thanks.

Wayne

 

Fits GM cars and mini-vans with the 4T65E,/4T60E transmission.
Stock dimensions with half inch cooling fins.
Drain bolt (with threads the same as small block chevy, 1/2-20) allows fluid changes without the mess
Cooler transmission for longer lasting clutches.
No chance of leaking makes it much safer than a transmission cooler.
No added weight to the vehicle compared with a trans cooler which adds a few pounds.
No blocking of the radiator for cooling keeps the engine running cooler.
Intercooled cars work better without blockage to the front radiator.
Highly recommended for turbo cars and higher stall converter applications.
Designed, developed, tested and manufactured by ZZPerformance

^^^^That is what ZZP says. It's the same dimensions as stock so stock bolts and factory re-usable gasket should be compatible. Also, since it is the same dimensions, it should hold the same amount of fluid as stock