new from canada
#12
10-06-2013, 11:08 AM
The bolts you asked about are the same size as the top bolts for those brackets. I replaced my rusty ones with stainless bolts.
The connector I believe leads to the coolant temp sensor that is in the lower intake, just under where the t-stat sits. If I'm right, you probably are not getting an accurate temp reading as the yellow wire looks broken....
The connector I believe leads to the coolant temp sensor that is in the lower intake, just under where the t-stat sits. If I'm right, you probably are not getting an accurate temp reading as the yellow wire looks broken....
im from goderich ont
#13
10-06-2013, 11:50 AM
Join Date: Aug 2011
Location: Ann Arbor, Michigan
Posts: 4,780
Welcome to the Forum. Good luck with the work that needs to be done.
There's actually quite a few members from Ontario; Taz and Matt (Slugger088) are the two I can think of off the top of my head.
There's actually quite a few members from Ontario; Taz and Matt (Slugger088) are the two I can think of off the top of my head.
Thread
Thread Starter
Forum
Replies
Last Post