5th Gen ('95-'99): Please help!!!!
Please help!!!!
my M.C. has a "1st generation" window switch which needs replacing. the only ones avail. now are 2nd gen. which DO NOT fit. i know there is a way to re-wire the switch so that the 2nd gen. will fit, but i need a wiring diagram for the switch--driver's side master switch. I've searched since July 2018, and still haven't found the switch, or an EXACT wiring diagram for a 1995 Z34.
I'd apreciate any help with this very much!
I'd apreciate any help with this very much!
MOTM Mod
Joined: May 2013
Posts: 5,499
From: Nebraska
my M.C. has a "1st generation" window switch which needs replacing. the only ones avail. now are 2nd gen. which DO NOT fit. i know there is a way to re-wire the switch so that the 2nd gen. will fit, but i need a wiring diagram for the switch--driver's side master switch. I've searched since July 2018, and still haven't found the switch, or an EXACT wiring diagram for a 1995 Z34.
I'd apreciate any help with this very much!
I'd apreciate any help with this very much!
Here is a link to ebay buy the Factory service manual for this info. Also you may need to find a U-pull it salvage yard and get the switch from a Lumina or a Monte Carlo.
It could be a simple as changing the connector plug. You could get that wire section with the plug from the salvage car and then wire it up to your car.?
https://www.ebay.com/sch/i.html?_fro...+1995&_sacat=0
Joined: Jul 2015
Posts: 56
From: Long Island NY
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): How do I bypass the neutral safety switch
Jeffs02rwdSS
Monte Carlo Repair Help
2
Feb 26, 2019 04:58 AM
6th Gen ('00-'05): Need Help With Headlight/Dimmer Switch
Onion39
Monte Carlo Repair Help
4
Jul 26, 2018 08:30 AM
