egr works the same, just plug in the connector. even though they "look" different, they are the same specs, just plug in the connector and you will be fine.

 

Hi Jason,


It is moving along albeit slow. Today I worked on the throttle body and EGR. For the life of me, I could not see any difference in the two throttle bodies. So I cleaned up and used the one off of the 3400. The EGR was different, the 3100 has a bottom mount and the 3400 had the side mount. I took the 3400 throttle body over to the vehicle and the electrical connectors seem to be the same. Are you aware of any electrical issues, like wires crossed or something? If non I would be inclined to use the '05 3400 throttle body and not make an adapter like the guide says. What do you think?


Pat

 

Use the 3400 tb, its 4mm larger

 

Thanks guys. I hope to have this in and running next Friday. Am I going to have any issues with the cooling sensors? I seem to recall something about two on the 3100 and 1 one on the 3400. I don't have the guide handy right now.

Pat