Monte Carlo Forum - Monte Carlo Enthusiast Forums

Monte Carlo Repair Help Have a Monte problem and need help? Good at troubleshooting? Discuss it here!

6th Gen ('00-'05): help

Thread Tools
 
Search this Thread
 
  #1  
Old 07-13-2015, 05:19 AM
shaggy's Avatar
Thread Starter
Join Date: Jul 2015
Posts: 5
Default help
Np check engine light on runs fine then won't run at all starts sputtering and stalls out
 
Reply
  #2  
Old 07-13-2015, 12:38 PM
Join Date: Jun 2014
Location: Minnesota
Posts: 8
Default
Does it have enough fuel in it?
Have you checked to see if the MAF is working properly?
Maybe check the EVAP sensor?
Not sure, let me ask around to couple of buddies.
 
Reply
  #3  
Old 07-13-2015, 05:43 PM
Join Date: Aug 2013
Posts: 55
Default
does it stall at idle or when you give it gas
I had an idle air control motor go bad stalled whenever I took foot off the gas
 
Reply
  #4  
Old 07-14-2015, 03:25 AM
shaggy's Avatar
Thread Starter
Join Date: Jul 2015
Posts: 5
Default
Originally Posted by aeceder
Does it have enough fuel in it?
Have you checked to see if the MAF is working properly?
Maybe check the EVAP sensor?
Not sure, let me ask around to couple of buddies.
Enough fuel yes and there no code or light on
 
Reply
  #5  
Old 07-14-2015, 03:26 AM
shaggy's Avatar
Thread Starter
Join Date: Jul 2015
Posts: 5
Default
Originally Posted by bossross
does it stall at idle or when you give it gas
I had an idle air control motor go bad stalled whenever I took foot off the gas
While giving it gas and at idle tak goes funky and shuts off
 
Reply
  #6  
Old 07-14-2015, 08:54 AM
ZIPPY02's Avatar
Monte Of The Month -- May 2012
Monte Of The Year 2012
Monte Of The Month -- February 2017
15 Year Member
10 Year Member5 Year Member3 Year Member1 Year Member
Join Date: Jan 2008
Location: Mountains of Utah
Posts: 4,906
Default
Think he meant enough fuel reaching the injectors.

Weak fuel pressure or faulty pump?

My PCV valve failed before and I had very erratic surging and it would not stay running.
 
Reply
  #7  
Old 07-14-2015, 12:00 PM
JC Colon's Avatar
Monte Of The Month -- May 2014
5 Year Member
3 Year Member1 Year Member
Join Date: Nov 2012
Location: Kent, Wa.
Posts: 2,405
Default
What Year and Engine!
 
Reply
  #8  
Old 07-14-2015, 01:55 PM
shaggy's Avatar
Thread Starter
Join Date: Jul 2015
Posts: 5
Default
Originally Posted by jc colon
what year and engine!
01 3.8
 
Reply
  #9  
Old 07-14-2015, 03:37 PM
shaggy's Avatar
Thread Starter
Join Date: Jul 2015
Posts: 5
Default
Originally Posted by ZIPPY02
Think he meant enough fuel reaching the injectors.

Weak fuel pressure or faulty pump?

My PCV valve failed before and I had very erratic surging and it would not stay running.
Well idk think the pump every time I had a pump goes it just goes no in between
 
Reply
  #10  
Old 07-19-2015, 08:34 PM
JC Colon's Avatar
Monte Of The Month -- May 2014
5 Year Member
3 Year Member1 Year Member
Join Date: Nov 2012
Location: Kent, Wa.
Posts: 2,405
Default
Does it do this when it only when the engine is hot, only when the engine is cold, or all the time?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Need HELP-HELP-HELP! Can't get into my Monte!
jaydflash
General Monte Carlo Talk
6
08-29-2014 03:38 AM
help help help
cj702
Monte Carlo Repair Help
2
08-20-2006 03:20 AM
Back to Subforum
Monte Carlo Repair Help
View Next Unread
What is this piece




Advanced Search
Quick Reply: 6th Gen ('00-'05): help


Reply Closed Thread Share

All times are GMT -5. The time now is 07:01 PM.