Monte Carlo Forum - Monte Carlo Enthusiast Forums

Monte Carlo Repair Help Have a Monte problem and need help? Good at troubleshooting? Discuss it here!

6th Gen ('00-'05): Exhaust manifold repair questions

   
Old Jun 13, 2019 | 11:39 AM
Share
  #11  
nitehawkjcb's Avatar
Monte Of The Month -- April 2012
Monte Of The Month -- December 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 3,211
15 Year Member
Default
Not that I can think of... Just unbolting the dogbones up top IIRC
 
Reply
Old Jun 13, 2019 | 03:47 PM
Share
  #12  
Jesse Smith's Avatar
Thread Starter
|
Joined: Jun 2019
Posts: 7
Default
Originally Posted by nitehawkjcb
Not that I can think of... Just unbolting the dogbones up top IIRC
So far so good. Removed the 3 into 1 bolts. (Flex pipe/down pipe). Egr bolts. Front to rear manifold bolts. Removed the motor hoist bracket that has the vacuum lines attached. Now onto find these blind bolts. Looks like it should be 6 or 7 judging by the part I'm looking at online. Looks like the motor hoist bracket and the manifold share the same holes into the head.. am I right?
 
Last edited by Jesse Smith; Jun 13, 2019 at 03:49 PM.
Reply
Old Jun 13, 2019 | 10:47 PM
Share
  #13  
Jesse Smith's Avatar
Thread Starter
|
Joined: Jun 2019
Posts: 7
Default
Originally Posted by Jesse Smith
So far so good. Removed the 3 into 1 bolts. (Flex pipe/down pipe). Egr bolts. Front to rear manifold bolts. Removed the motor hoist bracket that has the vacuum lines attached. Now onto find these blind bolts. Looks like it should be 6 or 7 judging by the part I'm looking at online. Looks like the motor hoist bracket and the manifold share the same holes into the head.. am I right?
Well I got it off. Definitely cracked at the weld. It was a little bit of a bitch but glad I found the culprit. Thanks again for your guys' advice!
 
Reply
Old Jun 14, 2019 | 12:19 AM
Share
  #14  
nitehawkjcb's Avatar
Monte Of The Month -- April 2012
Monte Of The Month -- December 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 3,211
15 Year Member
Default
Glad you got it figured out.
 
Reply
Old Jun 16, 2019 | 09:45 AM
Share
  #15  
The_Maniac's Avatar

Monte Of The Month -- December 2011
Monte Of The Month -- September 2014
10 Year Member5 Year Member3 Year Member1 Year Member
iTrader: (2)
Joined: Apr 2010
Posts: 12,601
From: Mentor, Ohio
15 Year Member
Default
That sucks, but mystery solved!!

Just curious, are you going to replace it or have it welded back together?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cracked Exhaust Manifold Replacment?
michelob
Headers/Intake/Exhaust
14
Jul 10, 2014 10:28 AM
Exhaust manifold stud
Shandley
Monte Carlo Repair Help
0
Oct 2, 2012 07:21 PM
Exhaust leak
smitty911
Headers/Intake/Exhaust
4
Mar 3, 2010 05:11 PM
manifold gasket change
bumpin_monte01
Monte Carlo Repair Help
6
Aug 28, 2005 06:05 PM
Back to Subforum
Monte Carlo Repair Help
View Next Unread
Engine knocking


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 01:29 PM.