Interior/Audio/Visual Electronics Discuss your audio/visual system and your interior here.

replacing speakers

Old Jul 13, 2009 | 09:52 AM
  #1  
White04monte's Avatar
Thread Starter
|
Joined: Apr 2009
Posts: 122
From: pittsburgh
Default replacing speakers

to keep things brief my window has been squeaking and i figured out that it is the felt strip on the inside and ordered one for each door from chevy. so i figured since i will have my door panels off i will replace my speakers since they get a little staticy sometimes. but to get to my question with most speakers having a higher resistance then factoy do you think i would have to replace the amp(really don't want to) or is there some good speakers that will sound at least as good as the factory.

well i tryed to keep it short lol
 
Old Jul 13, 2009 | 12:46 PM
  #2  
Chevycarlo97's Avatar
Joined: Apr 2008
Posts: 20
From: Minnesota
Default

You don't necessarily need to replace your stock amplifier. You can simply look for speakers with the right impedance (probably 2 ohms) and look for the right size that fits your car. I made a couple clicks around and found that sonic electronix has some choices that will probably fit. You can look elsewhere for more brands and better prices but this is to show you.

http://www.sonicelectronix.com/viewc..._id=35&f_31=97

Now they will more than likely sound better than stock but which speaker is better than the other is opinionated. Just look at the reviews and determine which one best suits you. Remember to find ones relatively close to your amplifiers output in RMS.
 
Old Jul 13, 2009 | 01:16 PM
  #3  
White04monte's Avatar
Thread Starter
|
Joined: Apr 2009
Posts: 122
From: pittsburgh
Default

very helpful thanks for the input
 
Old Jul 13, 2009 | 02:14 PM
  #4  
04MonteLS's Avatar
Joined: May 2005
Posts: 3,221
Default

Originally Posted by White04monte
to keep things brief my window has been squeaking and i figured out that it is the felt strip on the inside and ordered one for each door from chevy. so i figured since i will have my door panels off i will replace my speakers since they get a little staticy sometimes. but to get to my question with most speakers having a higher resistance then factoy do you think i would have to replace the amp(really don't want to) or is there some good speakers that will sound at least as good as the factory.

well i tryed to keep it short lol
Get 2ohm speakers if you can, that way you'll get the max output from your amp. I replaced mine w/4ohm speakers and while it sounds better than stock, doesn't get quite as loud due to the increased resistance and reduced output from the amp as a result.

I also highly suggest putting some sound dampening material on the door, it'll keep out more of the resonant noise as well as make your speakers sound much better. And you won't have turn the volume up as loud either because instead of the door absorbing the energy from the sound waves hitting it, the dampening will redirect those waves back into the cabin resulting in louder, more crisp sound.

I just installed some SecondSkin Damplifier Pro this weekend and all I can say is WOW!!!
 
Old Jul 13, 2009 | 06:33 PM
  #5  
01-ON-AIR's Avatar
Joined: Jul 2009
Posts: 73
From: South Haven, MI
Default

sound deadening is awesome, and stock sucks if you can afford it replace it.

i would recommend cascade spray deadening, and dynamat extreme.

if you have to replace your stock stuff, do your research.
 
Old Jul 13, 2009 | 08:36 PM
  #6  
04MonteLS's Avatar
Joined: May 2005
Posts: 3,221
Default

IMO, SecondSkin > *
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lorenzo
Interior/Audio/Visual Electronics
19
Nov 15, 2012 08:28 PM
s_dot03
Interior/Audio/Visual Electronics
3
May 26, 2010 09:27 AM
Eyedea
General Monte Carlo Talk
1
Jun 23, 2005 04:48 AM
bk4256
Monte Carlo Repair Help
2
Mar 28, 2005 06:37 PM
sporges
Monte Carlo Repair Help
1
Mar 25, 2005 12:29 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:29 AM.