aftermarket Alpine CDE133BT 2002 monte ss
#1
aftermarket Alpine CDE133BT 2002 monte ss
im a bit new around here and just recently bought a 2002 monte carlo ss v6 3.8. I just installed a Alpine CDE133-BT head unit brand new line and bought the GMOS-01 adapter from crutchfield when i purchased the head unit, after wiring the adapter up and checking the connections about 6 times, my speakers will not work with the radio or cd, i even plugged the factory head unit back into place and the speakers worked just fine. Is that the wrong adapter to retain all the chimes and onstar packages??
Im not quite sure as to whether or not this car has the amp that came standard on it or not. I think there is an amp in the trunk, its silver and mounted to the top of the trunk by the speakers and has two plug-ins running into it. I read somewhere that maybe i need the GMOS-04?
If this is pretty vague I've been exhausted from the past two days trying to troubleshoot this myself with no luck. Thanks much.
Im not quite sure as to whether or not this car has the amp that came standard on it or not. I think there is an amp in the trunk, its silver and mounted to the top of the trunk by the speakers and has two plug-ins running into it. I read somewhere that maybe i need the GMOS-04?
If this is pretty vague I've been exhausted from the past two days trying to troubleshoot this myself with no luck. Thanks much.
#4
Thanks much. Just got one and everything works, just gotta figure out my subwoofer situation now. Bought Two SSL 10" E10D subwoofers 1200W DVC and i hooked them up to the SSL 2600W 2 channel amp, hooked the subwoofers in parallel
http://.a248.e.akamai.net/pix.crutch..._4-ohm_2ch.jpg
now i feel like they're blown, one wont turn on and i even switched terminals to see if it would turn on and nothing. The other one is blown for sure. Did i have too much load on them or did i just crank em to high right away? I remember my amp would turn off after about 30 mins of use and i would have to turn off my head unit for them to come back on but even then the subs would only come on for a bit.
Any Solutions would be appreciated.
http://.a248.e.akamai.net/pix.crutch..._4-ohm_2ch.jpg
now i feel like they're blown, one wont turn on and i even switched terminals to see if it would turn on and nothing. The other one is blown for sure. Did i have too much load on them or did i just crank em to high right away? I remember my amp would turn off after about 30 mins of use and i would have to turn off my head unit for them to come back on but even then the subs would only come on for a bit.
Any Solutions would be appreciated.
#8
Thanks much. Just got one and everything works, just gotta figure out my subwoofer situation now. Bought Two SSL 10" E10D subwoofers 1200W DVC and i hooked them up to the SSL 2600W 2 channel amp, hooked the subwoofers in parallel
http://.a248.e.akamai.net/pix.crutch..._4-ohm_2ch.jpg
now i feel like they're blown, one wont turn on and i even switched terminals to see if it would turn on and nothing. The other one is blown for sure. Did i have too much load on them or did i just crank em to high right away? I remember my amp would turn off after about 30 mins of use and i would have to turn off my head unit for them to come back on but even then the subs would only come on for a bit.
Any Solutions would be appreciated.
http://.a248.e.akamai.net/pix.crutch..._4-ohm_2ch.jpg
now i feel like they're blown, one wont turn on and i even switched terminals to see if it would turn on and nothing. The other one is blown for sure. Did i have too much load on them or did i just crank em to high right away? I remember my amp would turn off after about 30 mins of use and i would have to turn off my head unit for them to come back on but even then the subs would only come on for a bit.
Any Solutions would be appreciated.
That black plug is the connection to the factory amp, which you don't want to run if you have an aftermarket deck.
Thread
Thread Starter
Forum
Replies
Last Post
SLAB_Ryder
Interior/Audio/Visual Electronics
6
10-07-2009 10:59 PM
mickey
Interior/Audio/Visual Electronics
0
10-01-2005 03:08 PM