security relearn wont work!
#1
security relearn wont work!
Hey guys. 05 SS, just put in my zzp 1.0 pcm. I've tried all 3 of the security relearn procedures zzp gave, 3 times each per key (I have two keys ), and got nothin. The 10 minute on 10 seconds off procedure never stops flashing the security light the second cycle. If I put my stock pcm in it fires right up. Can anyone give me an idea? I called zzp and still haven't got a response from them.. I'd like to get it runnin some time soon! Lol
thanks
thanks
#3
Join Date: Apr 2010
Location: Mentor, Ohio
Posts: 12,236
I'm not sure what the ZZP instructions look like, but give give this relearn process a try:
https://montecarloforum.com/forum/fw...rocedure-8598/
It could take 4-5 tries.
https://montecarloforum.com/forum/fw...rocedure-8598/
It could take 4-5 tries.
#4
I'm not sure what the ZZP instructions look like, but give give this relearn process a try:
https://montecarloforum.com/forum/fw...rocedure-8598/
It could take 4-5 tries.
https://montecarloforum.com/forum/fw...rocedure-8598/
It could take 4-5 tries.
I'm gonna give this one a shot I guess. Thanks!
#5
The one I bought for my 05 SS from ZZP the airbag light stayed on. I had to send them my original PCM and had that one tuned. Once I got my original one back I sent back theirs.
#6
Thanks man! It started on the second cycle this way! No check engine light, airbag light, or even the abs light zzp said to expect have come on yet.
#8
Check engine light came on. I spoke too soon. I cleared it and it just came back on. Can't scan it to see if it's the same codes til tomorrow. These are the codes it threw:
P1631 Theft deterrent start enable signal not correct -HISTORY
P2A01 O2 circuit range/performance bank 1 sensor 2- CURRENT HISTORY MIL
P2A01- CONFIRMED
P2A01- PENDING
Isn't that the downstream o2 which is deleted?..
P1631 Theft deterrent start enable signal not correct -HISTORY
P2A01 O2 circuit range/performance bank 1 sensor 2- CURRENT HISTORY MIL
P2A01- CONFIRMED
P2A01- PENDING
Isn't that the downstream o2 which is deleted?..
#10
Can you send ZZP your original PCM that came from your Monte to get tuned? For some reason the Monte's are very touchy - same thing happened to me with my 05SS. After I reinstalled my original PCM tuned by ZZP everything worked. Then I sent back theirs for the core charge