Pulley Size?
#21
RE: Pulley Size?
Make sure that your Midas shop uses stainless pipe and nickel or stainless rod, or you're going to have a rusted out exhaust stsyem in no time. Most shops I've talked to use alumanized pipe and mild steel rod, not even mig or tig welded
#22
RE: Pulley Size?
ORIGINAL: RocknSS04
Make sure that your Midas shop uses stainless pipe and nickel or stainless rod, or you're going to have a rusted out exhaust stsyem in no time. Most shops I've talked to use alumanized pipe and mild steel rod, not even mig or tig welded
Make sure that your Midas shop uses stainless pipe and nickel or stainless rod, or you're going to have a rusted out exhaust stsyem in no time. Most shops I've talked to use alumanized pipe and mild steel rod, not even mig or tig welded
#23
RE: Pulley Size?
ORIGINAL: Submariner
[sm=smokin.gif]
ZZP has a 3" downpipe with a magnaflow hi flow cat which is what I'm going to order. I plan on taking the Monte to my local Midas and have them replace the resonator with a section ofexhaust pipe.
[sm=smokin.gif]
ZZP has a 3" downpipe with a magnaflow hi flow cat which is what I'm going to order. I plan on taking the Monte to my local Midas and have them replace the resonator with a section ofexhaust pipe.
#24
RE: Pulley Size?
ORIGINAL: RocknSS04
Make sure that your Midas shop uses stainless pipe and nickel or stainless rod, or you're going to have a rusted out exhaust stsyem in no time. Most shops I've talked to use alumanized pipe and mild steel rod, not even mig or tig welded
Make sure that your Midas shop uses stainless pipe and nickel or stainless rod, or you're going to have a rusted out exhaust stsyem in no time. Most shops I've talked to use alumanized pipe and mild steel rod, not even mig or tig welded
#25
RE: Pulley Size?
ORIGINAL: Nocturnx
Let us know how that turns out. I'd get my resonator removed if I knew it wouldn't create too much drone in the cabin.
ORIGINAL: Submariner
[sm=smokin.gif]
ZZP has a 3" downpipe with a magnaflow hi flow cat which is what I'm going to order. I plan on taking the Monte to my local Midas and have them replace the resonator with a section ofexhaust pipe.
[sm=smokin.gif]
ZZP has a 3" downpipe with a magnaflow hi flow cat which is what I'm going to order. I plan on taking the Monte to my local Midas and have them replace the resonator with a section ofexhaust pipe.
My SLP cat seems to quiet it down quite a bit compared to the RealTek one I had though.
#26
RE: Pulley Size?
[/quote]
Let us know how that turns out. I'd get my resonator removed if I knew it wouldn't create too much drone in the cabin.
[/quote]
No drone at all. I'm 46 andthe wife is 47 so if it was annoying she wouldpitch afit (Believe me she would). I drive 55 miles 1 way and can listen to the radiolow. When she is in the car I can listen toher talking at a normal level and still hear the radio.But outside from behind the car it sounds sweet! Sorry for the late response but I've been tied up concentrating on the other mods.
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): Pulley Size/Injectors
Yellowjacket
Engine/Transmission/Performance Adders
17
10-01-2012 07:58 PM
ParrottZ34
Engine/Transmission/Performance Adders
3
02-10-2008 09:06 PM