I,m hoping the short stack unit from ZZP wil fit. I aven't checked yet, but it's only an inch thick.
https://www.zzperformance.com/grand_...&catid=139
Wayne

 

Oh, without a doubt it will fit... But what I am talking about is the full size IC that is 2.25 thick... I have heard of alot of clearance issues with the Gen V installed...

Are you just going to pay them to install it? I figure that is what I am going to do...

 

[align=center][align=center]MCF Members[/align][align=center]Please be a active member, & VOTE[/align][align=center]for your favorite members Monte Carlo[/align][align=center][:-][/align][align=center][/align][align=center][/align][align=center]* Voting ends @ 11:59 PM (PST) October 31, 2007[/align][align=center]Good Luck to all.[/align][align=center][/align][align=center]Click below link to go to MCFVotingPost[/align][align=center][/align][align=center][/align][align=center]https://montecarloforum.com/m_58408/mpage_1/key_/tm.htm[/align][/align]

 

Been there, voted that.

 

who is ed moorland? arent headers the lim?im looking at doing the gen v myself also the pulleys ive bought for my gen 3 will fit the gen v.

 

Ed Morad is a parts dealer that can be found on ClubGP. He is a huge help to the L67 engine mod group.

Headers are and exhaust modification. They look like long tubes coming off the engine. The LIM is the Lower Intake Manifold and is found directly below the supercharger and between the valve covers.

Pulleys will fit the same, but you will actually use a larger pulley for the same amount of boost. EG a 3.8 on a Gen III is the same as a 4.0 on a Gen V.