TPMS question
#1
TPMS question
I am unsure if the factory TPMS fits my new rims. I installed it but it doesn't fit flat against the inner rim. There is a good 3/4 inch between rim and sensor. Are they suppose to fit flat and snug or kinda float out there with all pressure being in the stem mount. Don't want to buy a new set if this isn't right. Thanks
#3
check out the internet for images like the one below, they do look like there is a pretty decent space between the wheel and the sensor. And remember the stems aren't like those rubber ones, they seem pretty solid.
#4
Thanks Chris, I am just gonna install the tires for now and maybe get those put on this summer. I don't know, I may go look on ebay for a cheap set. Saw a new set for 135 or so.
#5
I am unsure if the factory TPMS fits my new rims. I installed it but it doesn't fit flat against the inner rim. There is a good 3/4 inch between rim and sensor. Are they suppose to fit flat and snug or kinda float out there with all pressure being in the stem mount. Don't want to buy a new set if this isn't right. Thanks
Last edited by zjerry; 01-26-2012 at 05:58 PM.
#9
Thanks Jerry. I have just spent so much on the car lately and don't want to buy a new set. But it will only cost me more later when have to get them installed and rebalanced so I might get them now.
Thread
Thread Starter
Forum
Replies
Last Post
Facekicker
Tires/Rims/Suspension
22
10-28-2013 10:10 AM