Torq Thrust Ms... any one have em?
#11
10-05-2011, 12:07 PM
My intent was not to argue, but to get your input and reasoning behind your statement. I understand your viewpoint and respect it. 
I had a BIG concern about the difference in spacing which is why I spent a significant amount of time questioning several manufacturers and installers about it.
BTW 115 - 114.3 = .7 / 5 = .14
I had a BIG concern about the difference in spacing which is why I spent a significant amount of time questioning several manufacturers and installers about it.BTW 115 - 114.3 = .7 / 5 = .14
#12
10-05-2011, 12:59 PM
Join Date: Sep 2008
Location: Southeast PA
Posts: 25,136
BTW a 5 bolt is measured from the center of the hub bore to the lug. Not the distance between each lug.
So 115 - 114.3 = .7mm / 2 = .35mm
So 115 - 114.3 = .7mm / 2 = .35mm
#13
10-05-2011, 01:38 PM
They say you measure from the center of the 1st stud to the outer edge of the 3rd stud.How To Measure A Wheel Bolt Pattern
#14
10-09-2011, 01:57 PM
Well with all this being said, im not gunna eff around, I'm just get the right sized wheel for the car! I cant afford any mistakes!!!
Thread
Thread Starter
Forum
Replies
Last Post
monte07
Engine/Transmission/Performance Adders
1
03-04-2009 09:22 PM
Floydcarlo
Engine/Transmission/Performance Adders
1
11-24-2008 04:11 PM
mickey
Interior/Audio/Visual Electronics
0
10-01-2005 03:08 PM
