strut tower braces
#12
RE: strut tower braces
I used a STB from a cutty convert and used that GMPP bar... orginally had the GMPP bar then went with the cutty (wasnt as solid but very close) and now run them both! much much tighter... STB's get rid of the whoble when making sharp steering inputs.
#13
RE: strut tower braces
ORIGINAL: Bigg J
There is also this one (which I plan to purchase very shortly!!):
GMpartsdirect.com sway bar kit for '00-'05 Monte Carlos.
There is also this one (which I plan to purchase very shortly!!):
GMpartsdirect.com sway bar kit for '00-'05 Monte Carlos.
#17
RE: strut tower braces
I just purchased both front and rear strut tower braces from ZZPerformance. The front is 1/4" short. I'm probably going to elongate the holes and use it.
The rear will fit, but only over the nuts, but not with the nuts removed. There isn't enough threads to double nut them. It might fit if I put a thick washer under it. I have some hard washers at work. I might try that. Problem is there is a lip on the strut tower that interferes with the brace. Second problem is the brace intereferes with my 12" subwoofer box. I think GMPP's will go over it, ZZP's won't. [&o].
I like these braces. They are heavy duty. They both use 4 bolts. I think I will try to make them work, even if I have to notch the speaker box.
Wayne
The rear will fit, but only over the nuts, but not with the nuts removed. There isn't enough threads to double nut them. It might fit if I put a thick washer under it. I have some hard washers at work. I might try that. Problem is there is a lip on the strut tower that interferes with the brace. Second problem is the brace intereferes with my 12" subwoofer box. I think GMPP's will go over it, ZZP's won't. [&o].
I like these braces. They are heavy duty. They both use 4 bolts. I think I will try to make them work, even if I have to notch the speaker box.
Wayne
#18
RE: strut tower braces
I just finished installing the ZZP strut tower braces. They are HEAVY DUTY! 3/16" 4130 chrome moly steel. The front was 1/4" short, so I had to elongate the mount holes 1/8" each with a 1/2" end mill. Added 1 washer under opposite corners to level it out, then it bolted right on. The rear I put 2 washers under each corner to lift it over the lip on the strut tower. I'm wondering if the Grand Prix doesn't have this lip. No real problem, tho.
Only problem now is the rear brace hangs low enough that it interferes with the sub speaker box, as it was a tight fit before. Very happy with the install.
Here is the link for the struts, and they are REAL affordable a under $130 for the pair:
http://www.zzperformance.com/grand_prix/products1.php?id=614&catid=138
All the pic's show lots of my mods, if you know what to look for.
[IMG]local://upfiles/1500/C934DA24A7FD4798904195980DECD6DC.jpg[/IMG]
[IMG]local://upfiles/1500/DD8E5C231F824A7691D24F2061C00AB5.jpg[/IMG]
[IMG]local://upfiles/1500/1AF674424438466199C77ED00AC428E7.jpg[/IMG]
Only problem now is the rear brace hangs low enough that it interferes with the sub speaker box, as it was a tight fit before. Very happy with the install.
Here is the link for the struts, and they are REAL affordable a under $130 for the pair:
http://www.zzperformance.com/grand_prix/products1.php?id=614&catid=138
All the pic's show lots of my mods, if you know what to look for.
[IMG]local://upfiles/1500/C934DA24A7FD4798904195980DECD6DC.jpg[/IMG]
[IMG]local://upfiles/1500/DD8E5C231F824A7691D24F2061C00AB5.jpg[/IMG]
[IMG]local://upfiles/1500/1AF674424438466199C77ED00AC428E7.jpg[/IMG]
#20
RE: strut tower braces
Not yet, but it does seem stiffer. I don't drive hard, but I like firm. These are the most beefy available. PERIOD!
What I notice the most is the extra vibration from the poly motor mounts. Not happy with that.
Wayne
What I notice the most is the extra vibration from the poly motor mounts. Not happy with that.
Wayne