Hi and low beam...
#3
It's possible to do both (Quad Headlights & Independent Fogs), but the Fog Light is more involved
For the Highs + Lows (Quad Headlights), check out my schematic over on NAIOA:
http://www.naioa.com/v2/modules.php?...ewtopic&t=4893
For the fogs, you basically need to detach the fogs from the BCM and run them independently. You can do that with this circuit:
http://www.naioa.com/v2/modules.php?...wtopic&t=43478
BBEngineer
For the Highs + Lows (Quad Headlights), check out my schematic over on NAIOA:
http://www.naioa.com/v2/modules.php?...ewtopic&t=4893
For the fogs, you basically need to detach the fogs from the BCM and run them independently. You can do that with this circuit:
http://www.naioa.com/v2/modules.php?...wtopic&t=43478
BBEngineer
Last edited by bbengineer; 05-18-2011 at 01:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): Is there a way to rewire headlights so low and hi beam are on?
SteveCZ28
General Monte Carlo Talk
0
03-04-2012 03:34 AM
teamfbody
Interior/Audio/Visual Electronics
4
04-25-2010 10:21 PM
Mod Guide: Hi & Low beam lighting at the same time
GrandPaDave
FWD Tech Guides '95-'07
3
09-17-2006 02:38 AM