Grille install
Thread Starter
|
Joined: Feb 2012
Posts: 1
From: Outer Banks, NC
Grille install
Hello, everyone!
I am a brand new member who just purchased an 02 black on black SS on 1/26/12. I would like to know how to install an SLP sport grille. This is the same one on the Tony Stewart special edition. I bought one and it came without instructions. Thanks.
I am a brand new member who just purchased an 02 black on black SS on 1/26/12. I would like to know how to install an SLP sport grille. This is the same one on the Tony Stewart special edition. I bought one and it came without instructions. Thanks.
Monte Of The Month -- August 2014
Joined: Sep 2008
Posts: 25,145
From: Southeast PA
(I recommend painting it)
Remove the Knight's Crest from the front of the car.
Use 3M emblem adhesive tape (or anything you want to use) and stick it on the outer edge of the grille, line up and PRESS IT DOWN!!!
That's all there is to it.
Also those Bowtie emblems suck pretty bad. In about a month or so it will start to peel. It's really just a painted piece of rubber, not an emblem.
The SS emblem on the side of these cars fits in that slot really nicely though
Remove the Knight's Crest from the front of the car.
Use 3M emblem adhesive tape (or anything you want to use) and stick it on the outer edge of the grille, line up and PRESS IT DOWN!!!
That's all there is to it.
Also those Bowtie emblems suck pretty bad. In about a month or so it will start to peel. It's really just a painted piece of rubber, not an emblem.
The SS emblem on the side of these cars fits in that slot really nicely though
Monte Of The Month -- July 2011
Monte Of The Month -- December 2016
Monte Of The Month -- December 2016
Joined: Jan 2011
Posts: 7,524
From: St.Louis , MO.
That's what he said he got, not sure if he did though because he also said he got the SLP, maybe he's mistaken?
(I recommend painting it)
Remove the Knight's Crest from the front of the car.
Use 3M emblem adhesive tape (or anything you want to use) and stick it on the outer edge of the grille, line up and PRESS IT DOWN!!!
That's all there is to it.
Also those Bowtie emblems suck pretty bad. In about a month or so it will start to peel. It's really just a painted piece of rubber, not an emblem.
The SS emblem on the side of these cars fits in that slot really nicely though
Remove the Knight's Crest from the front of the car.
Use 3M emblem adhesive tape (or anything you want to use) and stick it on the outer edge of the grille, line up and PRESS IT DOWN!!!
That's all there is to it.
Also those Bowtie emblems suck pretty bad. In about a month or so it will start to peel. It's really just a painted piece of rubber, not an emblem.
The SS emblem on the side of these cars fits in that slot really nicely though
Sweet write up.. That's exactly how I did mine.. But never thouht of using the SS from the side, great idea.. I'm gonna do that, take off my Bowtie and put the SS on it.. Nice touch..
Thread
Thread Starter
Forum
Replies
Last Post
