will have picks up hopefully this weekend will answer any questions on prices or can get info for installation

 

Sweet. I remember my first beer.

 

let me know how much or how hard. and if ya end up with any tranny probs. ty,joe

 

The kit cost a little over $5000 and the tranny should be able to take it and it isn't a hard kit to install its all bolt on just have to send the ecu and tcu to get tunned by the company and have to buy the gxp Pontiacs struts and sway bar because the Montes is too big its built for a 20mm bar we have a 30mm

 

cartuning kit?

 

yes it is the cartuning

 

i have the cartuning kit on turbo monte (3800 series engine) and love there products, i am actually going to be upgrading my turbo, downpipes and getting a meth kit and turbo headers. (cartuning sells the upgrade)

 

Nice man what size turbo do you have and how much do you put to the ground

 

im on the basic cartuning kit (61 trim precision turbo, 2.5" downpipes, plog, stock rear manifold, no meth). my engine is built (bored 30 over, st5 cam, stage 3 heads, yt rockers, and alot of other stuff) trans is built as well. i made 384whp 352ft lb torque on 13psi and 14 degrees timing at WOT. im gonna upgrade to the turbonetics t66 and 3" downpipes and 2.5" intercooler charge pipes. (charge pipes right now one is 2.5" other is only 2") the turbo headers and meth injection. once this is done i should be able to cram about 16-18psi along with more timing and should in theory make right around 550whp.

the turbo and downpipes are choking the air flow, thats me major problem on why im not making more power which i should be with my engine build. in all honesty if i would just upgrade the downpipes and nothing else i almost guarantee i could make around 420-430whp