New Member Area New to Monte Carlo Forum? Stop in tell us about you.

02 monte carlo wont start

Old Dec 12, 2015 | 05:33 PM
  #1  
Mjonas1986's Avatar
Thread Starter
|
Joined: Dec 2015
Posts: 2
Default 02 monte carlo wont start

I have a 02 monte carlo. I had some overheating issueso and had to replace my radiator and also replaced the head gaskets and when I got the engine back together. The car now won't start. It cranks but nothing else. I have fuel it seems to have good compression. Any help will help
 
Old Dec 12, 2015 | 10:03 PM
  #2  
plumbob's Avatar
Monte Of The Month -- January 2016
5 Year Member3 Year Member1 Year Member
Joined: Feb 2013
Posts: 2,293
From: Pacific NW
10 Year Member
Default

Does it have spark?
Sounds like something got missed in the reassembly. You may want to back track your reassembly steps and see if a wire didn't get put back right. It happens to the best of us. Lol
 
Old Dec 12, 2015 | 10:07 PM
  #3  
Mjonas1986's Avatar
Thread Starter
|
Joined: Dec 2015
Posts: 2
Default

Yes it has spark and we have checked all the wires and everything we took off went back together
 
Old Dec 12, 2015 | 10:37 PM
  #4  
plumbob's Avatar
Monte Of The Month -- January 2016
5 Year Member3 Year Member1 Year Member
Joined: Feb 2013
Posts: 2,293
From: Pacific NW
10 Year Member
Default

Air, spark and fuel are the magic formula. Are you sure all the plug wire got put back in the right order? If it cranks you can rule out PCM or anti-theft/ ignition problems.
 

Last edited by plumbob; Jan 2, 2016 at 02:12 PM.
Old Dec 14, 2015 | 08:49 PM
  #5  
JC Colon's Avatar
Monte Of The Month -- May 2014
3 Year Member1 Year Member
Joined: Nov 2012
Posts: 2,405
From: Kent, Wa.
5 Year Member
Default

Check the wire harness to your ignition module!
 
Old Dec 14, 2015 | 09:48 PM
  #6  
The_Maniac's Avatar

Monte Of The Month -- December 2011
Monte Of The Month -- September 2014
10 Year Member5 Year Member3 Year Member1 Year Member
iTrader: (2)
Joined: Apr 2010
Posts: 12,605
From: Mentor, Ohio
15 Year Member
Default

If you crank (as Plumbob said, rules out anti-theft and dead battery), you validated compression and spark. I assume no blocked air intake... Next, do you know that you have fuel pressure? Can you hear the pump hum when it primes?
 


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:35 AM.