New Member Area New to Monte Carlo Forum? Stop in tell us about you.

**Tune Up**

Thread Tools
 
Search this Thread
 
  #1  
Old 05-03-2015, 03:16 PM
Gproducktionz614's Avatar
3 Year Member
1 Year Member
Thread Starter
Join Date: Mar 2015
Location: Columbus, OH
Posts: 19
Default **Tune Up**

I have a 2005 Monte LS, I'm looking into giving it a tune up, you know the plugs, wires. Can someone assist me with what plugs/wires should I purchase, of course I'm wanting to keep whatever the current factory plugs/GM recommended inside the car but purchase new. Also a few helpful tips on tackling the job would help as well, I'm not a car moron so I know my way around the engine, so...
 
  #2  
Old 05-03-2015, 03:36 PM
Leprechaun93's Avatar
Monte Of The Month -- June 2013
Monte Of The Month -- December 2015
5 Year Member
3 Year Member1 Year Member
iTrader: (1)
Join Date: Jul 2011
Location: Middletown, NY
Posts: 10,385
Default

AC Delco plugs and wires are a safe bet, it also helps to rock the engine forward to get the back plugs.
 
  #3  
Old 05-03-2015, 03:55 PM
Gproducktionz614's Avatar
3 Year Member
1 Year Member
Thread Starter
Join Date: Mar 2015
Location: Columbus, OH
Posts: 19
Default

How would you advise to rock the engine forward? And thanks on the Delco tip!!
 
  #4  
Old 05-03-2015, 04:33 PM
Leprechaun93's Avatar
Monte Of The Month -- June 2013
Monte Of The Month -- December 2015
5 Year Member
3 Year Member1 Year Member
iTrader: (1)
Join Date: Jul 2011
Location: Middletown, NY
Posts: 10,385
Default

You would unbolt the front dog bone engine mounts and im not 100% where on the 3400, but on the front of the engine there is hook you can attach a ratchet strap to, tie it off somewhere and crank it down to give yourself some more room.
 
  #5  
Old 05-03-2015, 05:58 PM
The_Maniac's Avatar

Monte Of The Month -- December 2011
Monte Of The Month -- September 2014
10 Year Member
5 Year Member3 Year Member1 Year Member
iTrader: (2)
Join Date: Apr 2010
Location: Mentor, Ohio
Posts: 12,156
Default

All these people talk about rocking the engine forward. I've never needed to on a non-SC 3800 and the 3400 is even easier. As long as you can do it by touch and feel, you are good to go, plenty of room on the 3400. If you need more room or be able to see what you are doing, two nuts and two bolts, you can flop the entire coil pack plate forward and out of the way.

AC Delcos and NGK plugs are your best bet (some AC Delcos are re-branded NGK, I've got some in my garage with both brandings on them). I've been using NGK platinums from RockAuto on the 3400s for a few years. No issues.

Here is a link to a thread that may be of some assistance with maintenance:
https://montecarloforum.com/forum/fw...0-miles-46078/
 
  #6  
Old 05-03-2015, 09:13 PM
Join Date: Apr 2015
Posts: 430
Default

I also support NGK and acdelco from experience
 
  #7  
Old 05-12-2015, 11:57 AM
Join Date: May 2015
Location: Thompson Station, Tn
Posts: 152
Default

I personally have had great luck with the AC Delco in the new aridium plugs. They run great and very clean. They are about 7 bucks a peice so really do not break the bank. Let me know what you think if you give them a try
 
  #8  
Old 05-12-2015, 12:22 PM
Join Date: Apr 2015
Posts: 430
Default

you could also spray some wd40 or pb blaster on the exhaust bolts so they don't become rusted and weak over time,and it would probably be a good time to change the fuel filter
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
07ss_ls4
Engine/Transmission/Performance Adders
13
05-09-2014 12:17 PM
wiz kidd
Off Topic
1
04-04-2007 02:48 PM
kaiser
Monte Carlo Repair Help
5
12-16-2006 08:02 PM
SophicSage
Monte Carlo Repair Help
10
08-09-2006 09:37 AM
RIVER RAT
Monte Carlo Repair Help
0
04-20-2006 12:38 AM



Quick Reply: **Tune Up**



All times are GMT -5. The time now is 08:05 AM.