Monte Carlo Repair Help Have a Monte problem and need help? Good at troubleshooting? Discuss it here!

No headlights this morn

Old Dec 15, 2014 | 05:25 AM
  #1  
avendo's Avatar
Thread Starter
5 Year Member3 Year Member1 Year Member
Joined: Oct 2014
Posts: 494
10 Year Member
Default No headlights this morn

Weird one I start car and no driving lights or headlights,got high beams and fogs..pull light switch and still nothing..possible for both lights burnt out at same time...lol,i guess i will check it out when i get home after work...
 
Old Dec 15, 2014 | 03:30 PM
  #2  
avendo's Avatar
Thread Starter
5 Year Member3 Year Member1 Year Member
Joined: Oct 2014
Posts: 494
10 Year Member
Default

when I tilt the wheel up the lights go on,i replaced the radio buttons the other day..took airbag off,is there anything in there or is it a plug under the column that's loose? help.
 
Old Dec 17, 2014 | 12:05 PM
  #3  
STUMPMI's Avatar

Monte Of The Month -- February 2013
3 Year Member1 Year Member
iTrader: (1)
Joined: Dec 2011
Posts: 9,944
From: Taylor Michigan
5 Year Member
Default

Sounds like a bad connection/pinched/loose wire.

Id take it apart and recheck all the connections/broken wire.
 
Old Dec 18, 2014 | 05:14 AM
  #4  
avendo's Avatar
Thread Starter
5 Year Member3 Year Member1 Year Member
Joined: Oct 2014
Posts: 494
10 Year Member
Default

Whats under there that can screw up..i have had no problem now.
 
Old Dec 18, 2014 | 06:31 AM
  #5  
STUMPMI's Avatar

Monte Of The Month -- February 2013
3 Year Member1 Year Member
iTrader: (1)
Joined: Dec 2011
Posts: 9,944
From: Taylor Michigan
5 Year Member
Default

I thought in a past post you mentioned you had the steering column apart?

If not...
It could be your multifunction switch/turn signal high beam control is failing?

also you could check the connection where it plugs in at the bottom of the steering wheel.
 
Old Dec 18, 2014 | 11:28 PM
  #6  
babyjokerxxxxx's Avatar
Joined: Oct 2014
Posts: 25
From: daytona beach/pgh pa
5 Year Member
Default

i agree with STUMPMI and the multifunction switch(which i just changed) might be going bad. sounds like the same problem i had minus the tilting of the steering wheel.
 
Old Dec 18, 2014 | 11:32 PM
  #7  
babyjokerxxxxx's Avatar
Joined: Oct 2014
Posts: 25
From: daytona beach/pgh pa
5 Year Member
Default

just in case it is the switch i just got mine on ebay for 38 dollars from this seller acautoparts04....was the cheapest i could find and a direct replacement.
 
Old Dec 19, 2014 | 04:24 AM
  #8  
avendo's Avatar
Thread Starter
5 Year Member3 Year Member1 Year Member
Joined: Oct 2014
Posts: 494
10 Year Member
Default

is it easy to change?..it has been fine since it came back on...
 
Old Dec 19, 2014 | 04:55 AM
  #9  
owens91's Avatar
Monte Of The Month -- October 2014
5 Year Member3 Year Member1 Year Member
iTrader: (2)
Joined: Dec 2012
Posts: 2,335
From: philly pa
10 Year Member
Default

Took me an her to change I say is fairly easy
 
Old Dec 19, 2014 | 05:48 AM
  #10  
avendo's Avatar
Thread Starter
5 Year Member3 Year Member1 Year Member
Joined: Oct 2014
Posts: 494
10 Year Member
Default

there must be a youtube on it someplace...
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:23 AM.