Piece of advise I learned (from my father) when probing connectors with a meter. Use something like a paper clip in the female pins. Thanks to that, we found a female pine in a harness no longer making proper contact.

 

https://montecarloforum.com/forum/ge...☆-57237/

PO300
PO403
PO405
PO446 ✴︎ ⬅︎ ⬅︎ ⬅︎

All these Codes were triggered by a faulty FUEL TANK PRESSURE SENSOR!

Wait for the Low Fuel Warning before attempting to DIY.
Start engine.
Pull FUEL PUMP Relay ... Let Engine stall to relieve pressure in system.
Remove GROUND Wire from Battery.
With car Raised and SAFETY STANDS securely in place.

Support Tank with Jack.

(I made a "Jig" to attach to the Jack. Sawed the square bottom off from Milk Crate. Drilled holes through Hockey Puck. Mounted Puck to center of Milk Crate with Heavy Duty Zip Ties. Affixed carpet to other side of Milk Crate bottom for padding.)

Lower tank enough to access Sensor atop Fuel Pump.
Unfasten Pigtail from Sensor.
Unclip and Remove Sensor ••• Straight-up.
DO NOT BREAK THE END OF SENSOR OFF INSIDE PUMP!!!

If you need a Charcoal Canister do it when you replace Sensor.

Removing Relay to releive Pressure throws a Code which may require a MIL Light reset.