Monte Carlo Repair Help Have a Monte problem and need help? Good at troubleshooting? Discuss it here!

97 z 34 3400

Old Dec 24, 2016 | 07:10 AM
  #1  
Brandon Victory's Avatar
Thread Starter
|
Joined: Jul 2016
Posts: 4
Default 97 z 34 3400

keep gettin small air pocket in cooling system add about 2 cups of coolant thru the bleeder valve at the thermostat housing any ideas on whats causing this ive replace radiator (it had a crack in it ) replaced water pump with oem after it was replaced with aftermarket ive used an intaked sealer in it to try to make sure intake manifold is not leaking it was nano tech with small fibers sealer i been pulling this stuff out of radiator cap when checkin coolant in the mornings this car was overheating by the way seems to be getting better thoughts and or ideas welcome
 
Old Dec 24, 2016 | 09:34 AM
  #2  
drivernumber3's Avatar
MOTM Mod
5 Year Member3 Year Member1 Year Member
Joined: May 2013
Posts: 5,500
From: Nebraska
10 Year Member
Smile

Well 2 things you might check.
1. sometimes the thermostats are defective even a new one.
2 maybe have the system pressure tested at your favorite Garage and see what they come up with.
Also I goggled it and found some youtube links to check this is just the first one, that popped up


 

Last edited by drivernumber3; Dec 24, 2016 at 09:37 AM.
Old Dec 24, 2016 | 10:42 PM
  #3  
nitehawkjcb's Avatar
Monte Of The Month -- April 2012
Monte Of The Month -- December 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 3,211
15 Year Member
Default

Could be a gasket failing, intake or head gasket especially... Is it a 3400 or a 3.4 DOHC?
 
Old Dec 25, 2016 | 04:02 AM
  #4  
96z34man's Avatar
Joined: Dec 2010
Posts: 508
From: Brevard County, FL
5 Year Member
Default

It's a 97, ergo it's a DOHC. Poor him.
 
Old Dec 25, 2016 | 09:26 AM
  #5  
nitehawkjcb's Avatar
Monte Of The Month -- April 2012
Monte Of The Month -- December 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 3,211
15 Year Member
Default

Could be swapped.
 


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:52 PM.