My steering wheel emblem has a little dent in it. Is this something I can replace? If so, how? is it just glued in place?

 

i dont think you can replace it. i had the same thing on my cobalt before it got totalled. when i got to look at the back of the one in the cobalt cuz the air bag went off it was attatched to the steering wheel i think u need to order a whole airbag set up to get a new one. if

 

[align=center] [/align][align=center]Hi Tom, I don't like the emblem on the 06-07 Monte : (It looks like it was made[/align][align=center]from re-cyled beer can's). I would check with your dealer to see if it's covered[/align][align=center]under factory warranty or check parts department for replacement.[/align][align=center]I'm sure the Body Shop should be able to give you the infor on replacement.[/align][align=center]I was thinking about making a new one for my steering wheel and have been[/align][align=center]searching for designs and materials. I will do some research and post.[/align][align=center]Let us know if you find out and post it please.[/align][align=center]Thanks, `Space[/align][align=center][/align][align=center][:-]Click `it [:-][/align][align=center][IMG]local://upfiles/714/B1221464BE9F4615A24FA68FCA7A778C.jpg[/IMG] [/align]

 

again on the cobalt forum cobaltss.net someone tried makign a replacement for the one in the cobalt which is the same one in the monte except the monte is black and cobalt is silver. only way to get it off is to get the part its attached to unattached to the steering wheel because there is clips that clip into the back of it that can only be popped off form the inside