Headers/Intake/Exhaust Custom Exhaust? New Headers? Need Opinions on Intakes? Discuss making your ride breathe better here.

Need advice about my intake manifolds

Old Mar 8, 2010 | 07:33 PM
  #1  
cangri_926's Avatar
Thread Starter
|
Joined: Feb 2010
Posts: 29
Question Need advice about my intake manifolds

Hi guys I was reading and have read about the difference on 2000+intakes that use a slides not threaded heater line,my car is a 3.1 from 1999 and I just recently did my gaskets so for a fact I know it's a push slide in pipe with gasket.my rocker are diferent than an older ones also,how can I figure this out if I have the newer 3.1 from 2000+ that is same size I read as 3.4 intake
 
Old Mar 8, 2010 | 11:38 PM
  #2  
Wilco's Avatar
Joined: Mar 2009
Posts: 1,064
From: Lawton, OK
Default

Usually you can tell what you have, engine wise, by the engine's vin# stamped somewhere on the block. I'd suggest dropping a 3.8, any year will do since they are the same block but don't get one too old (mileage wise), with the trans/differential/axles and start the modding process. I found a 3.8 (04) S/C (but was missing the TB) for $750 last year with 20,000 on the odometer but decided to go turbo instead. You'll have to look around at the salvage yards for deals. Heck, give Ed Morad a call and see what they have. They are a salvage yard, I believe in Ohio, that carry a lot of 3.8 stuff. I used to own a 97 ls and that little engine used to be pretty fast, but there's definitely a difference between the 3.1 and the 3.8. But you really maybe better off buying an MC car with a 3.8 S/C or N/A and go from there. Regardless of which way you go, be prepared to pay 'cause performance parts for the V-6 cars aren't cheap.(yet)
 
Old Mar 9, 2010 | 06:18 AM
  #3  
cangri_926's Avatar
Thread Starter
|
Joined: Feb 2010
Posts: 29
Default

Originally Posted by montyss02
Usually you can tell what you have, engine wise, by the engine's vin# stamped somewhere on the block. I'd suggest dropping a 3.8, any year will do since they are the same block but don't get one too old (mileage wise), with the trans/differential/axles and start the modding process. I found a 3.8 (04) S/C (but was missing the TB) for $750 last year with 20,000 on the odometer but decided to go turbo instead. You'll have to look around at the salvage yards for deals. Heck, give Ed Morad a call and see what they have. They are a salvage yard, I believe in Ohio, that carry a lot of 3.8 stuff. I used to own a 97 ls and that little engine used to be pretty fast, but there's definitely a difference between the 3.1 and the 3.8. But you really maybe better off buying an MC car with a 3.8 S/C or N/A and go from there. Regardless of which way you go, be prepared to pay 'cause performance parts for the V-6 cars aren't cheap.(yet)
yeah i know,and my neighbor had one and i guess he sold it cuz hes driving a nissan now,but i dont talk to him,thats why i missed it plus he never put a for sale.i got a couple salvage places around here but 3.1 its what i found,i live in pa so i guess im trying jersey salvages next.thx
 
Old Mar 9, 2010 | 06:47 AM
  #4  
Wilco's Avatar
Joined: Mar 2009
Posts: 1,064
From: Lawton, OK
Default

My brother lives in Philly and he just got rid of an 01 regal with a 3.8 because the LIM leaked and he didn't want to fix it. I know that the salvage yards down on sw philly ( I can't remember the name of the are but there used to be races Friday & Saturday nights) should have a good selection on junked cars with good running engines/trans. If you're close to Philly give them a call.
 
Old Mar 9, 2010 | 07:49 AM
  #5  
ChibiBlackSheep's Avatar

Monte Of The Month -- August 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 25,145
From: Southeast PA
15 Year Member
Default

JUST got rid of a regal?

You should inform me if your brother wants to make stupid mistakes again :P
 
Old Mar 9, 2010 | 04:54 PM
  #6  
cangri_926's Avatar
Thread Starter
|
Joined: Feb 2010
Posts: 29
Default

Originally Posted by montyss02
My brother lives in Philly and he just got rid of an 01 regal with a 3.8 because the LIM leaked and he didn't want to fix it. I know that the salvage yards down on sw philly ( I can't remember the name of the are but there used to be races Friday & Saturday nights) should have a good selection on junked cars with good running engines/trans. If you're close to Philly give them a call.
this intake leaks are a disease on our gm,uhgg....look at that im closer to the ne philly like 10 min from the ne mall,but its ok,that might b one of my next projects.help is appreciated!!!!!!!
 
Old Mar 10, 2010 | 10:33 AM
  #7  
ChibiBlackSheep's Avatar

Monte Of The Month -- August 2014
10 Year Member5 Year Member3 Year Member1 Year Member
Joined: Sep 2008
Posts: 25,145
From: Southeast PA
15 Year Member
Default

Where are you at?

I live in NE Philly also! (near welsh and bustleton)
 
Old Mar 10, 2010 | 10:57 AM
  #8  
Wilco's Avatar
Joined: Mar 2009
Posts: 1,064
From: Lawton, OK
Default

Originally Posted by ChibiBlackSheep
JUST got rid of a regal?

You should inform me if your brother wants to make stupid mistakes again :P
Lol, I couldn't believe that he gave the car away for just a leaky LIM. But that's the life of the "Rich", I guess!
 
Old Mar 10, 2010 | 11:22 AM
  #9  
Wilco's Avatar
Joined: Mar 2009
Posts: 1,064
From: Lawton, OK
Default

Check the salvage yards on Essington Ave. in SW Philly.
 
Old Mar 10, 2010 | 10:34 PM
  #10  
cangri_926's Avatar
Thread Starter
|
Joined: Feb 2010
Posts: 29
Default

Originally Posted by montyss02
Check the salvage yards on Essington Ave. in SW Philly.
i will ck,i search google maps and if is giannas i already call them but nothing now there another one nearby ce auto sales,that one i will call tom morning,thx for the place location,!!!!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nova1585
Engine/Transmission/Performance Adders
5
Apr 3, 2010 09:05 PM
red04montels
Headers/Intake/Exhaust
7
Feb 16, 2010 07:51 PM
RickCoMatic
General Monte Carlo Talk
4
Dec 8, 2009 08:40 AM
RickCoMatic
General Monte Carlo Talk
3
Oct 25, 2009 07:20 PM
Vaszya
Engine/Transmission/Performance Adders
2
Jun 18, 2009 06:33 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:22 PM.