How to make your own intake box
#2
Saw this and I figured it would be a great read and tutorial for those interested.
https://nasaspeed.news/toolshed-engi...-cold-air-box/
https://nasaspeed.news/toolshed-engi...-cold-air-box/
#3
One other thing to keep in mind for such a large / deep area like ours is that you can just build a lid for it rather than worrying about trying to get a perfect seal to the under hood due to the open top.
In their application, it's a pretty shallow hole so a lid might be tough, but we've got plenty of room.
You're not pulling any air from the top anyways - all the air should be pulling from behind the headlight/ the fender well, so open vs close top shouldn't make any difference in performance.
In their application, it's a pretty shallow hole so a lid might be tough, but we've got plenty of room.
You're not pulling any air from the top anyways - all the air should be pulling from behind the headlight/ the fender well, so open vs close top shouldn't make any difference in performance.
Thread
Thread Starter
Forum
Replies
Last Post
Baby Jesus Swag
Engine/Transmission/Performance Adders
4
03-17-2015 07:37 PM
krazebone23
Headers/Intake/Exhaust
1
02-15-2007 03:33 PM