What work are YOU doing to you car this summer?
What kind of twin setup are you going with? How much power are you looking to make?
Well I already got the exhaust tips so they are on. Now i'll be looking into the radio and/or speakers. If I get ambitiousI may also get painted rocker panels. The drab plastic non painted ones are a bit dull for me.
I've got my work cut out for me...
As soon as I get a free weekend to get all this done overat the shop:
1. Switch all the dash lighting to red LEDs like what Mickey did (I already have the LEDs, just need to put them in)
2. Red bulbs for the floor, trunk, and license plate
3. Put some oil in my blower motor to stop it from squeaking
4. Fix my inside sunroof cover thing (It's off the tracks and hard to move)
5. Black out tail lights, reverse lights, fog lights with VHT Nite Shade (on its way)
6. New bowtie mudflaps (on their way)
7. Paint the inside of the wheel wells with black truck bed liner to keep them nice and dark black against my black car
8. Change the oil, top off the washer fluid
9. Detail the S**** out of the interior and engine bay
10. Clay bar, buff, wax, wax, then wax again to get my paint looking nice again
This summer:
1. PAC steering wheel interface
2. Alpine KCA-620M so I can listen to my iPod through my head unit
3. Tony Stewart grille
4. Black/clear headlights, 8000K HID hi/low beams, stealth signal bulbs
5. Silverstar fog lights
6. Build a custom Wizaired-style CAI with a K&N cone filter
7. ZZPerformance 1.0 PCM
8. ZZPerformance throttle body heat shield
9. Pacesetter headers w/ 3" downpipe and high-flow cat
10. Go to an exhaust shop and have them make me a 2.5" stainless cat-back with no U-bend or resonator, and weld on some Flowmaster 40's with 3", angle-cut, polished stainless steel tips.
As soon as I get a free weekend to get all this done overat the shop:
1. Switch all the dash lighting to red LEDs like what Mickey did (I already have the LEDs, just need to put them in)
2. Red bulbs for the floor, trunk, and license plate
3. Put some oil in my blower motor to stop it from squeaking
4. Fix my inside sunroof cover thing (It's off the tracks and hard to move)
5. Black out tail lights, reverse lights, fog lights with VHT Nite Shade (on its way)
6. New bowtie mudflaps (on their way)
7. Paint the inside of the wheel wells with black truck bed liner to keep them nice and dark black against my black car
8. Change the oil, top off the washer fluid
9. Detail the S**** out of the interior and engine bay
10. Clay bar, buff, wax, wax, then wax again to get my paint looking nice again
This summer:
1. PAC steering wheel interface
2. Alpine KCA-620M so I can listen to my iPod through my head unit
3. Tony Stewart grille
4. Black/clear headlights, 8000K HID hi/low beams, stealth signal bulbs
5. Silverstar fog lights
6. Build a custom Wizaired-style CAI with a K&N cone filter
7. ZZPerformance 1.0 PCM
8. ZZPerformance throttle body heat shield
9. Pacesetter headers w/ 3" downpipe and high-flow cat
10. Go to an exhaust shop and have them make me a 2.5" stainless cat-back with no U-bend or resonator, and weld on some Flowmaster 40's with 3", angle-cut, polished stainless steel tips.
Well a lot of stuff Hopefully.
Just painted my 71 SS clone, street/strip/show car great looking Crystal Red Pearl.
Have to put interior back in it, new headliner and carpet, fix one seat. Detail underhood, detail trunk, install all my new parts.
Update rear suspension to coilover Drag Setup. Would like to break into the 10s in the 1/4.
Just painted my 71 SS clone, street/strip/show car great looking Crystal Red Pearl.
Have to put interior back in it, new headliner and carpet, fix one seat. Detail underhood, detail trunk, install all my new parts.
Update rear suspension to coilover Drag Setup. Would like to break into the 10s in the 1/4.
Thread
Thread Starter
Forum
Replies
Last Post
















