Video Needed
#1
Join Date: Apr 2010
Location: Mentor, Ohio
Posts: 12,156
Video Needed
So I finally got my Monte back together from the Evap swap. I also swapped the speedo overlay. I'm not sure if I messed something up in the process.
Currently, I can't take my Monte yet for a drive to see if the speedo is reading correctly.
Can anyone post a video of an SS cluster showing the speedo from the moment they put the key in and turn on the car? I need to see what the needle does to determine how to fix mine.
THANKS!!
Currently, I can't take my Monte yet for a drive to see if the speedo is reading correctly.
Can anyone post a video of an SS cluster showing the speedo from the moment they put the key in and turn on the car? I need to see what the needle does to determine how to fix mine.
THANKS!!
#2
#3
Join Date: Apr 2010
Location: Mentor, Ohio
Posts: 12,156
AWESOME! That's exactly what I needed!! And it tells me things are infact right!!
I was concerned, I saw my speedo needle drop down and back up and I thought "That's not right". It's been since October that I did anything with the Monte and I thought the needle went all the way across and then back.
Thanks for coming to my need so quickly!!
I was concerned, I saw my speedo needle drop down and back up and I thought "That's not right". It's been since October that I did anything with the Monte and I thought the needle went all the way across and then back.
Thanks for coming to my need so quickly!!
#4
No problem...besides it gave me a good excuse to open an account at youtube. With the nicer weather now I can get out there one of these days and make a few vids. I made that one with my old Sony DSCV3 camera but I'm itchin' to try out the Go Pro Hero 2 I picked up a while back.
Thread
Thread Starter
Forum
Replies
Last Post
6th Gen ('00-'05): VIDEO: GoPro view of last Orem run video
ZIPPY02
Showcase Your Ride
16
01-29-2014 04:51 PM
Skeletal Crow
Paint/Body Work/Exterior
2
03-30-2011 10:04 AM