Interior Build: Shifter walkthrough soon to come
#11
Almost sounds like the cable swivel is in the 3 speed position instead of the 4 speed (or 3 speed with OD) on the shifter bracket if it is not going into Park properly. Or maybe this could be the the cause of your adjustment issue "
To use the
B&M QuickSilver Shifter with the GM
4L60E, 4L65E, 4L80E, and 4L85E
equipped with a PRNDL switch you will
need optional accessory kit #75498 otherwise
you can use the supplied GM
This link is the install and adjustment info from B&M. Not sure if It will help or not but I hope so. http://www.bmracing.com/bmnew/pdf/9500662.pdf
Wow that did not paste like I wanted but it is also on page one when you use that link.
To use the
B&M QuickSilver Shifter with the GM
4L60E, 4L65E, 4L80E, and 4L85E
equipped with a PRNDL switch you will
need optional accessory kit #75498 otherwise
you can use the supplied GM
This link is the install and adjustment info from B&M. Not sure if It will help or not but I hope so. http://www.bmracing.com/bmnew/pdf/9500662.pdf
Wow that did not paste like I wanted but it is also on page one when you use that link.
#12
I can understand that, most here want to have a little something done unique to their Monte. Best of luck, hope this goes well for you. Should be pretty sick...
#13
Almost sounds like the cable swivel is in the 3 speed position instead of the 4 speed (or 3 speed with OD) on the shifter bracket if it is not going into Park properly. Or maybe this could be the the cause of your adjustment issue "
To use the
B&M QuickSilver Shifter with the GM
4L60E, 4L65E, 4L80E, and 4L85E
equipped with a PRNDL switch you will
need optional accessory kit #75498 otherwise
you can use the supplied GM
This link is the install and adjustment info from B&M. Not sure if It will help or not but I hope so. http://www.bmracing.com/bmnew/pdf/9500662.pdf
Wow that did not paste like I wanted but it is also on page one when you use that link.
To use the
B&M QuickSilver Shifter with the GM
4L60E, 4L65E, 4L80E, and 4L85E
equipped with a PRNDL switch you will
need optional accessory kit #75498 otherwise
you can use the supplied GM
This link is the install and adjustment info from B&M. Not sure if It will help or not but I hope so. http://www.bmracing.com/bmnew/pdf/9500662.pdf
Wow that did not paste like I wanted but it is also on page one when you use that link.
#15
ok so the walkthrough is complete i have it all typed up on microsoft word but idk how to post it. can i make a new thread with a link to down load the file at all? Can someone help me here lol
#16
Click "go advanced" button below.
Then scroll down and click manage attachments
Upload your file.
Right click on link then choose "copy shortcut"
go back up into your message and left click one time, then right click and choose paste.
Then post.
Then scroll down and click manage attachments
Upload your file.
Right click on link then choose "copy shortcut"
go back up into your message and left click one time, then right click and choose paste.
Then post.
Thread
Thread Starter
Forum
Replies
Last Post
2003supersport
Engine/Transmission/Performance Adders
5
12-19-2009 06:38 PM
04 Intimidator
Tires/Rims/Suspension
6
06-08-2008 10:51 AM