2004 Monte Carlo LS Build
#1
2004 Monte Carlo LS Build
I know I already have recent updates thread but that's becoming overwhelming and repetitive, I'm going to make this thread just to show how much my car has progressed. I will only post Mods that have been done from the beginning to the current time, not plans that I'm hoping of. So here we go.
The day i got her i cleaned her pretty good.
My first mod was a 3rd brake light overlay with Monte Carlo cut out.
Shortly After I put a vinyl overlay on my rear bowtie. (thanks to Jarheadbobandmax for the vinyl)
I had a system from my truck. So I put that all in but didn't fully connect it right away.
Soon after I put in Red LEDs All around
Next I did my first performance mod, or at least I thought so.
Next, after all the stereo was hooked up i added a 10 disk CD changer.
Next I added my Wizaired CAI with 9" K&N Cone Filter
Continuing with visual mods I added a 10k HID Kit and front plate filler.
I finally then tinted my tail lights and reverse lights.
For Christmas I received a SLP Upper Grille Insert and Bluetooth for my stereo so i installed those.
Also with Christmas i got the Weathertech floor mats.
The day i got her i cleaned her pretty good.
My first mod was a 3rd brake light overlay with Monte Carlo cut out.
Shortly After I put a vinyl overlay on my rear bowtie. (thanks to Jarheadbobandmax for the vinyl)
I had a system from my truck. So I put that all in but didn't fully connect it right away.
Soon after I put in Red LEDs All around
Next I did my first performance mod, or at least I thought so.
Next, after all the stereo was hooked up i added a 10 disk CD changer.
Next I added my Wizaired CAI with 9" K&N Cone Filter
Continuing with visual mods I added a 10k HID Kit and front plate filler.
I finally then tinted my tail lights and reverse lights.
For Christmas I received a SLP Upper Grille Insert and Bluetooth for my stereo so i installed those.
Also with Christmas i got the Weathertech floor mats.
Last edited by red04montels; 11-05-2010 at 03:27 PM.
#2
I then got rims off of a Buick and got them to fit, along with getting a pace car spoiler installed.
Shortly after I added the Team Monte Carlo Spoiler Decal (thanks to jarheadbobandmax)
I continued to work on visual by turning the decals on the trunk lid to black.
Then I went with just the bowtie outline decal.
The black housed headlights came next.
Shortly after installing these headlights I got chrome turn signal bulbs and tinted the corner so there was no more orange.
After this I went and tinted my windows 35% all around and 20% on the front windshield.
Shortly after the tint I went with dual exhaust. Stock mufflers and 4” SLP Stainless Tips.
And then painted the exhaust to help prevent rust in the future.
Then I went with SLP Lower Grille Insert and Black Headlight Covers to help complete my front end look.
Then I finally got some roof rails. It really helps complete the look of my car.
Shortly after I added the Team Monte Carlo Spoiler Decal (thanks to jarheadbobandmax)
I continued to work on visual by turning the decals on the trunk lid to black.
Then I went with just the bowtie outline decal.
The black housed headlights came next.
Shortly after installing these headlights I got chrome turn signal bulbs and tinted the corner so there was no more orange.
After this I went and tinted my windows 35% all around and 20% on the front windshield.
Shortly after the tint I went with dual exhaust. Stock mufflers and 4” SLP Stainless Tips.
And then painted the exhaust to help prevent rust in the future.
Then I went with SLP Lower Grille Insert and Black Headlight Covers to help complete my front end look.
Then I finally got some roof rails. It really helps complete the look of my car.
Last edited by red04montels; 11-05-2010 at 03:30 PM.
#3
#6
theyre switched to chevy decals, i dont have a closeup, i'm really only doing big mods on this thread and some smaller ones can be seen in the pics, but they're chevy now
Thread
Thread Starter
Forum
Replies
Last Post
walkingonabullet
Interior/Audio/Visual Electronics
97
11-16-2012 05:27 PM
RosDaddy
Interior/Audio/Visual Electronics
7
01-26-2010 02:38 AM