Engine/Transmission/Performance Adders Chat about your engine, transmission, nitrous, superchargers, turbos, and tuning.

ZZP 1.0 relearn help!

Thread Tools
 
Search this Thread
 
  #11  
Old 08-11-2012, 04:08 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

i think that if it doesn't crank over after going to the OFF and back to start.. i'm hosed.
 
  #12  
Old 08-11-2012, 04:19 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

OFF for 45
turn to START (no start)
slipped back to ON (no flashing security light.

waiting 12 more.. c'mon!!

i think this is the 3rd full cycle where there has not been a flashing security light.
 
  #13  
Old 08-11-2012, 04:23 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

ok, re-reading their page... after this i'm going to disconnected the battery for 5 seconds.. reconnect, and then try to start..

also, at no time have i opened the door and obviously the hood has been closed.
 
  #14  
Old 08-11-2012, 04:27 PM
red04montels's Avatar
Monte Of The Month -- September 2010
10 Year Member
5 Year Member3 Year Member1 Year Member
Join Date: Aug 2009
Location: Wisconsin
Posts: 9,379
Default

Don't try to start it until after the 4th cycle. It sounds like that may be where you're going wrong
 
  #15  
Old 08-11-2012, 04:30 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

really because their initial directions say to "TRY to start it".

well, after this cycle, i'll do the quick disconnect and try .. if not.. back to square one without the START
 
  #16  
Old 08-11-2012, 04:40 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

ok.. didn't start.

Disconnected battery for 30 seconds.
DID NOT attempt to start.. went to ON
Security light started flashing
started 12 minute timer.

I call this cycle 1.
 
  #17  
Old 08-11-2012, 04:54 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

Light was still flashing.
turned off for 45 seconds (did not remove key)
turned back to ON (Did NOT attempt to start)
light still flashing
started 12 minute timer

I call this cycle 2. (9 minutes to go)
 
  #18  
Old 08-11-2012, 05:04 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

BTW after the "4th cycle" do i go to the off position, wait at least 30 and then try to start? or do go directly to START?
 
  #19  
Old 08-11-2012, 05:10 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

Light was still flashing.
turned off for 45 seconds (did not remove key)
turned back to ON (Did NOT attempt to start)
light still flashing
started 12 minute timer

i call this cycle 3.

Oh, i accidentally hit my door lock button while leaning in this time.. that's not going to make a difference, is it?
 
  #20  
Old 08-11-2012, 05:21 PM
Sleeping Martyr's Avatar
Thread Starter
Join Date: Feb 2010
Posts: 49
Default

Light was still flashing.
turned off for 45 seconds (did not remove key)
turned back to ON (Did NOT attempt to start)
light still flashing
started 12 minute timer

i call this cycle 4

I may have to call it quits after this because we're about to get hit with a bunch of rain..
 


Quick Reply: ZZP 1.0 relearn help!



All times are GMT -5. The time now is 04:52 PM.