stage II intercooler kit
#1
stage II intercooler kit
Has anyone here used this:
Intercooler Kit | Supercharger Intercoolers | Air to Water Intercooler Kit
I'm starting work on my 05 s/c SS and some of you recommended an intercooler... I will probably do headers & full exhaust rework, & already have a new air intake... (and I can now hear my super charger ;-)
I have not dropped pullies, yet, but will certainly do that with headers and an intercooler. The car is a daily driver & yes I'm planning on a scan gauge and spending many hours with my laptop learning :-S
Any other recommendations for an intercooler? I might switch cams at the same time, being I have things appart. I have done some research on these forms & am still on the fence on how far to go with a cam; I do want to keep things nice for daily driving & lots of commute miles...
Intercooler Kit | Supercharger Intercoolers | Air to Water Intercooler Kit
I'm starting work on my 05 s/c SS and some of you recommended an intercooler... I will probably do headers & full exhaust rework, & already have a new air intake... (and I can now hear my super charger ;-)
I have not dropped pullies, yet, but will certainly do that with headers and an intercooler. The car is a daily driver & yes I'm planning on a scan gauge and spending many hours with my laptop learning :-S
Any other recommendations for an intercooler? I might switch cams at the same time, being I have things appart. I have done some research on these forms & am still on the fence on how far to go with a cam; I do want to keep things nice for daily driving & lots of commute miles...
#2
There are some nice used intercoolers that go on sale a lot over at clubgp
I would keep an eye out over there for sure!
Justin is selling a scan gauge, I would pick that up before you got into modding, knock is important to know before anything else honestly.
https://montecarloforum.com/forum/pr...lar-pod-39970/
I would probably do the I/C and headers at similar times followed by probably rockers since you'll be DDing it.
I would keep an eye out over there for sure!
Justin is selling a scan gauge, I would pick that up before you got into modding, knock is important to know before anything else honestly.
https://montecarloforum.com/forum/pr...lar-pod-39970/
I would probably do the I/C and headers at similar times followed by probably rockers since you'll be DDing it.
#4
Please excuse my ignorace here, but my gen 6 monte (05 ss - s/c) has a gen 5 m90 blower??? is that accurate?
This is what I found for intercoolers at zz... Anyone have recomendations on the upper / lower intake and the fuel rails ?? THANKS!!!
ZZPerformance - Intercooler #ZZ-FSIC-38
This is what I found for intercoolers at zz... Anyone have recomendations on the upper / lower intake and the fuel rails ?? THANKS!!!
ZZPerformance - Intercooler #ZZ-FSIC-38
#5
Please excuse my ignorace here, but my gen 6 monte (05 ss - s/c) has a gen 5 m90 blower??? is that accurate?
This is what I found for intercoolers at zz... Anyone have recomendations on the upper / lower intake and the fuel rails ?? THANKS!!!
ZZPerformance - Intercooler #ZZ-FSIC-38
This is what I found for intercoolers at zz... Anyone have recomendations on the upper / lower intake and the fuel rails ?? THANKS!!!
ZZPerformance - Intercooler #ZZ-FSIC-38
The Gen 5 (or Gen V) only came on the L32 Supercharged Engines, which were never an option for a Monte Carlo, but you could always upgrade to a Gen V supercharger
Thread
Thread Starter
Forum
Replies
Last Post
superrod29
Engine/Transmission/Performance Adders
12
03-23-2010 01:38 PM