Still waiting on pcms are they just plug n play and do I have to break it in just let it run to learn the new settings

 

You might have to do a security relearn and I would advise have a case relearn performed.

Other than that, just drive it.

 

Ordered 2 pc.s from zzp 11/30 selected send in pcm first shipped off pcms same day tracking number said guaranteed by 12/03 called zzp 12/05 lady confirmed they received my pcm was told they would email me letting me know when they will ship emailed Tim to see if my order was in hold due to me buying 2 pcms n shipped one but told rep I would send one at a time so i would not be without both cars was told that was ok by the rep and Tim almost a week later still no pcm what to do ik zzp shipping is a1 but this some bs

 

TBH, short of just canceling the order, theres not much you really can do. I wouldn't worry too much though, they're a pretty reputable company, I'm sure you'll get it soon as long as you're communicating with them.

Its just a tough time of year, especially ordering it on the BF / cyber monday weekend with something like this adding extra complexity as it's not just grabbing a part off the shelf and sticking it in a box.

 

I agree with Bumpin, ZZP is typically pretty good. They may be slammed dealing with PCM orders from Black Friday.

BTW - Can you check to see if the period key works on your keyboard? That last post was annoying to read as one long sentence.

 

I bought a remanded pcm and I can’t get my key fob to work on the doors or trunk lid, any suggestions?

 

This is a new topic, please start a new thread. It will also get more attention for people to chime in and help.

 

Okay I will

 

Got back the pcm while out of town installed when arrived couldn't get the car to start battery died from sitting gave a jump car fired right up drove to get gas n refuel car died got a jump car started right up when to ride around stopped at a friend's left the car running for a few turned the car off chilled.for a min tried to leave for work car wouldn't start gave a jump no fire after work went to look at the car n tried to jump it no luck went to junkyard for a battery but ran out of gas due to sending of instruments cluster for blue leds should of used trip on sunroof display or damn aeroforce scan gauge finally realized I was out of gas when I changed aeroforce perimeters best thing to have ever but being so anxious and impatient to get the gp running I wasn't thinking but got the battery installed jumped twice and the gp started drove home sat in driveway for a few shut car off and tried to crank again no luck so I changed the ignition control module because I had this issues once before and thought it was the fuel pump but it was the icm I can hear the fuel pump somewhat but when I check the fuel rail and depressurize it fuel squirted out will change pump tomorrow just in case but at a lose for now

Waiting to send off monte carlo pcm got get the gp situated want to see how that reacts with the tunes

 

Took battery to az to get charged picked them up used a different one from the one I had in the car cranked once. Didn't catch cranked again holding key in start fired up finna drive for a while to try and charge battery scan gauge reads 14.4-6 at idle


Shut car off cranks and no start until battery dies out going to change out the plugs ok they weren't changed but car fired right up before sending pcm off but I want to keep it
Are these the autolite 104 got at autozone for 259 a plug on zzp website 10$

for 4