Engine/Transmission/Performance Adders Chat about your engine, transmission, nitrous, superchargers, turbos, and tuning.

man i need some help

Old Jul 18, 2005 | 07:13 AM
  #1  
batman's Avatar
Thread Starter
|
Joined: Jul 2005
Posts: 118
From:
Default man i need some help

i cant seem to find any intakes (cold air, ram air, etc.) for my 04 LS, everything is for the SS, or in other words, 3.8 liter instead of the 3.4 liter. am i not looking hard enough or wats the deal, does it matter that its for a 3.8 instead of a 3.4, can i still use it? if you guys know please help me out , im tryin to soup up my engine but cant find anything. thanks
 
Old Jul 18, 2005 | 03:26 PM
  #2  
Ca$$e's Avatar
Joined: Jun 2005
Posts: 178
From:
Default RE: man i need some help

Try 3800performance.com they let you choose between 2000+ LS/SS when looking at parts.
 
Old Jul 18, 2005 | 03:50 PM
  #3  
montejass's Avatar
Joined: Aug 2004
Posts: 2,777
From: Tomball, Texas
Default RE: man i need some help

There is not much out there specifcally designed for the 3.4L in the way of CAI's. The ebay units I hear are ok for the $$$..

 
Old Jul 18, 2005 | 04:17 PM
  #4  
Ca$$e's Avatar
Joined: Jun 2005
Posts: 178
From:
Default RE: man i need some help

^^ they are cheap though, I wouldnt buy an Intake for a Monte from Ebay, Im sorry but its way to cheap to be a good product.
 
Old Jul 19, 2005 | 06:12 AM
  #5  
batman's Avatar
Thread Starter
|
Joined: Jul 2005
Posts: 118
From:
Default RE: man i need some help

yea, ebay does have pretty cool stuff, but i dont know if i can trust a $12 intake for my car, its just too cheap! besides that a performance chip, but ill never install one of those, digital horsepower, not a big fan, but thank you montejass and ca$$e for your input, its greatly appreciated.
 
Old Jul 19, 2005 | 10:50 AM
  #6  
montejass's Avatar
Joined: Aug 2004
Posts: 2,777
From: Tomball, Texas
Default RE: man i need some help

I am curious, what are the differences between the 3.8 and 3.4 as far as throttle body location. Can someone post a pic of the 3.4L engine bay?


I would not suggest purchasing a chip. But, either Hypertech or DHP have a programmer that will allow you to modify the PCM at will. Hypertech does not have a unit out for the 3.4L but say they may have it on the horrizon pending demand. They have a dyno chart showing a 15-19 HP gain for the 3.8L , DHP will be able to get you over the 20HP addition hump. There is another programmer out there as well but off the top of my head I suffer from CRS. Run a search for programmers, it's somewhere in the forum..



 
Old Jul 30, 2005 | 08:53 AM
  #7  
safeZ's Avatar
Joined: Jul 2005
Posts: 7
Default RE: man i need some help

Make your own cai its not that hard
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jarheadbobandmax
Off Topic
7
Jun 20, 2010 10:03 PM
nemesis
General Monte Carlo Talk
41
Sep 2, 2009 06:47 PM
nebstewart07
Paint/Body Work/Exterior
3
Jun 19, 2009 08:38 AM
mickey
General Monte Carlo Talk
6
Aug 23, 2006 05:31 PM
Puppet Master
General Monte Carlo Talk
4
Aug 15, 2006 07:44 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:19 PM.