LIM gasket questions/Concerns--HELP!!
Thread Starter
Joined: Feb 2013
Posts: 16
From: Lex., KY
LIM gasket questions/Concerns--HELP!!
Hi everyone just bought a 2003 monte SS l36, non supercharged. I was wondering if my engine has 94,000 original miles, should I go ahead and replace the Lower intake manifold gaskets with felpro fix it kit before they fail, and if so does anyone have any walkthroughs and torque settings for this job? Any help would be greatly appreciated, thanks
Theres a cpl on you tube...
Look under:
Upper and lower intake gaskets on a 3800.
Always use the felpro aluminum gasket set for the lower....
I used the doorman for the upper and the elbows!
Good Luck!
Look under:
Upper and lower intake gaskets on a 3800.
Always use the felpro aluminum gasket set for the lower....
I used the doorman for the upper and the elbows!
Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post
03_MONTE SS
Engine/Transmission/Performance Adders
0
Feb 23, 2013 08:38 PM
Andrew
New Member Area
1
Aug 30, 2012 11:41 AM
Budsjlm
Monte Carlo Repair Help
21
Feb 2, 2012 03:47 AM
